OEM Part Number(s):AFH55-M10, AFH55M10, 74-50052, 7450052

FITMENT:
1990-1994NissanD212.4L
1995-1996NissanPickup2.4L

PACKAGE:
1 × Air Flow Sensor

Install...

Buy Now From Amazon

OEM Part Number(s):AFH55-M10, AFH55M10, 74-50052, 7450052

FITMENT:
1990-1994NissanD212.4L
1995-1996NissanPickup2.4L

PACKAGE:
1 × Air Flow Sensor

Installing The Replacement Mass Air Flow Sensor
1. Position MAF sensor in the vehicle. Make sure the airflow direction indicated on the sensor is toward the engine.
2. Install sensor-to-air-duct seal(s), if so equipped, on the replacement MAF sensor.
3. Connect the MAF sensor to the throttle body air cleaner ducts. If the sensor mounts directly on the throttle body, install and tighten the mounting screws to 10 ft-lb. DO NOT OVERTIGHTEN!
4. Position clamps over the air duct/MAF sensor connections and tighten. Replace the clamps if necessary.
NOTE: For the MAF sensor to work properly, the sensor/air duct connections must be airtight.
5. CAREFULLY plug the harness connector lead into the MAF sensor.


Similar Products

Standard Motor Products ATS23 Air Cleaner TemperaturePOWERCO Electric Fuel pump for 1994 1993 1992 1991 1990 1999 1988 Nissan D21 2.4L 1st Character of VIN is 1, USA Built E8032 69618MAHLE Original KL 766 Fuel FilterNGK RC-NX93 Spark Plug Wire SetIdle Control Valve compatible with Nissan D21 Pickup 90-94 / Nissan Pickup 95-04 4 Cyl 2.4L 2 TerminalsBeck Arnley 158-0333 Fuel Injection Pressure Regulator