If you want to make your printing platform flat enough, ideal stuff is glass sheet. Borosilicate glass is rated for higher temperatures than normal sheet glass making it a better material for use as a heated bed. After cracking a few sheets of normal glass from rapidly cooling or heating, borosilicate glass will quell your frustrations.
Note Please note that this glass is about 1/4" short on all sides when use on CR-10, 10S 300 series due to CR-10 heat bed size extension.
Features: * Borosilicate is a very high temperature glass. It has a melt temperature of about 800° C and a very low thermal expansion coefficient.
* Resistant to thermal shock compared to regular glass.
* Prepare a second plate and quickly switchplates when a model finishes printing. This significantly reduces printer idle time between prints.
* Reduces warping, however platform has to be properly leveled as is the case with any platform on a 3D printer.
Specification: Material: 100% Borosilicate
Size: 300x300x3mm
Thickness: 3mm
Package content: 1 x 300x300x3mm Borosilicate Glass
- 100% borosilicate glass. Borasolicate glass is rated for higher temperatures than normal sheet glass. Flat, heat resistant plate. Does not warp during long term use.
- High binding power when heating. Easy to separate the plastic parts when cooling.
- Conducts heat evenly across the build surface to ensure consistent temperature throughout the build surface.
- Get you out of the trouble when plastic film decreased viscosity after a period of usage.
- Specially designed to fit the 3D Printers Prusa, Creality CR-10, Tevo Tornado, Mendela, AO Series. Please note that this glass bed is about 1/4" short on all sides when use on CR-10, 10S 300 series due to CR-10 heat bed size extension.
- 100% borosilicate glass. Borasolicate glass is rated for higher temperatures than normal sheet glass. Flat, heat resistant plate. Does not warp during long term use.
- High binding power when heating. Easy to separate the plastic parts when cooling.
- Conducts heat evenly across the build surface to ensure consistent temperature throughout the build surface.
- Get you out of the trouble when plastic film decreased viscosity after a period of usage.
- Specially designed to fit the 3D Printers Prusa, Creality CR-10, Tevo Tornado, Mendela, AO Series. Please note that this glass bed is about 1/4" short on all sides when use on CR-10, 10S 300 series due to CR-10 heat bed size extension.
