This submersible pump is designed for reliability and ultra-quiet operation to provide years of service. It is anti-corrosive, acid-resisting and durable. Has adjustable flow and is easy to clean.
This submersible water pump is great for fresh/salt water aquarium, fountains, spout and hydroponic systems.
FEATURE:
Adjustable water flow rate
Suction cup mounting feet for either vertical or horizontal mounting
Contains no seals or messy oils
Good for both fresh water and salt water
SPECIFICATION:
Max Flow Rate: 90 GPH (350L/H)
H-Max (Lift height): 2 feet
Voltage: 110 - 120 V @ 60 Hz
Length of power cord: 4 feet
Outlet: Fits 5/16, 1/2 inch ID (inside diameter) tubing
NOTE:
As this aquarium pump is submersible, and need to be put into water fully before power on to avoid the aquarium pump burning out
Please use socket with stable voltage and keep the motor running within rated power to ensure long lifespan
If the water pump is stuck by anything like Mud, garbage, sea salt, etc. need to be cleaned with clean water before use
Prohibit no-load running. Put the pump into water first before connecting power supply and ensure the pump must be completely submersed under water. When changing water, please disconnect power supply. It would shorten its lifespan and lead to making loud noises when running in the air for long time
DIMENSION: 2x1.75x1.25 inch (L x W x H)
INCLUDES:
(1) Pump
(2) Outlet adapters
- Adjustable flow rate: With a control knob, the maximal flow rate can be up to 80GPH(300L/H); Recommend maximum lift height: 1 foot. 80GPH is the theoretical flow rate at zero lift; the actual output decreases with pipe resistance, lifting height. And the higher the lifting height is, the lower the flow rate will be. For example, the flow rate is 80 GPH at 0 ft (without any water pipe), 40 GPH at 1 ft, 25 GPH at 1.5 ft, and nearly 0 GPH at 2 ft. Measure fountain height before purchase for proper fit.
- Optional 2 outlets: Fits 5/16"or 1/2"ID (inside diameter) tubing.
- Dimension: 2" x1.75" x1.25"(L x W x H), mini size, easy to hide or disguise; Length of power cord: 6 feet. Note: This water pump is only suitable for small fish tanks under 5 gallons.
- Wide application: Perfect for water fountains, pet fountain, aquariums, table fountains, waterfalls, hydroponic systems, irrigation systems and for use in any other water features.
- Note: To ensure the water pump operates properly, the following steps must be taken: Submersion Requirement: The pump must be fully submerged in water. Inlet Clearance: The water inlet should be at least 50mm below the water surface. Air Removal: For the first startup or after water replacement, gently shake the pump to expel any trapped air inside.
- Adjustable flow rate: With a control knob, the maximal flow rate can be up to 80GPH(300L/H); Recommend maximum lift height: 1 foot. 80GPH is the theoretical flow rate at zero lift; the actual output decreases with pipe resistance, lifting height. And the higher the lifting height is, the lower the flow rate will be. For example, the flow rate is 80 GPH at 0 ft (without any water pipe), 40 GPH at 1 ft, 25 GPH at 1.5 ft, and nearly 0 GPH at 2 ft. Measure fountain height before purchase for proper fit.
- Optional 2 outlets: Fits 5/16"or 1/2"ID (inside diameter) tubing.
- Dimension: 2" x1.75" x1.25"(L x W x H), mini size, easy to hide or disguise; Length of power cord: 6 feet. Note: This water pump is only suitable for small fish tanks under 5 gallons.
- Wide application: Perfect for water fountains, pet fountain, aquariums, table fountains, waterfalls, hydroponic systems, irrigation systems and for use in any other water features.
- Note: To ensure the water pump operates properly, the following steps must be taken: Submersion Requirement: The pump must be fully submerged in water. Inlet Clearance: The water inlet should be at least 50mm below the water surface. Air Removal: For the first startup or after water replacement, gently shake the pump to expel any trapped air inside.