HOBBYMATE Elite Lipo Battery Balance Charger 6A/80W W/AC Power Supply, Internal Resistance Meter, for LiHv Lipo Nimh Nicd Pb;

Important Note:
If you get error message on the charger display screen 'connection break' or something like that, please make sure you connect both the lipo battery power cable and the balance plug cable correctly
*Working Mode:
-Lipo/Lilo/LiFe/LiHv: balance charge, charge,fast charger, storage, discharge.
-NiMH/NiCd: Charge, Discharge, Cycle.
-PB: Charge, Discharge.

*Maximum safty:
-Low Input Voltage setting
-Delta-Peak Sensitivity
-Capacity limit
-Processing Time limit
-Temperature Threshold
*Microprocessor controlled Delta-peak sensitivity.
*High-Power and high-performance circuit.
*Automatically identify the cells counts of lithium battery section.
*Internal Resistance Checking,Let you know when a cell is going bad.
*Support LiHV battery and smart battery Phantom I,II,III.
*Terminal Voltage Control.(TVC)
User is able to adjust the end charge voltage per cell, and set a voltage which is kinder to the batteries as his will.
*individual cell voltage Monitoring and Individual cell balancing.
*Data storage and loading(Store up to 20 packs in memory)
*Digital Power
Specification:
* Input: DC11.0-18.0 Volt / AC to DC adapter (DC11.0-18.0V/ 6A)
* Max.charge power 80W
* Max.discharge power 10W
* Charge Current Range: 0.1-6.0A
* Discharge current range:0.1-2.0A
* Current drain for balancing: 400mAH/cell
* LiIon/LiPo/LiFe/ LiHV cells:1-6 cells
* NiCd/NiMH cells: 1-15cells
* Pb battery voltage: 2~20v
* Smart Battery: I II III.
* Net Weight: 220g
* Dimensions: 135x86x27mm
Package include:

1 x Hobbymate Elite Charger
1 x Charging cable
1 x Universal crocodile clip
Doesn't include the parallel charge board shown in the picture