Step 1: install anti mouse board in bottom of washerStep 2: Install outer drain pipe and put pipe on Toilet sink with drainage or other place with drain water facility. attention! This washer has a pump for drain, please make sure drainage pipe do not above washer . This is a suggestion, please use depend on actual situationStep 3: Connect inner pipe with washer and water faucetFirst, check if there is a black seal in water inner joint base.Second, put water inner pipe on intake of water inner valve.Third, connect with water faucet, we provide universal 3/4 threaded connector, if yours are different, please purchase adaptor depend on your water faucet or other outer water system.Step 4: connect power and active machine Step 5: choose water level (level 1 - level4) ,respectively little, low, medium, high.Step 6: Choose wash programNormal: suggest this program, the whole process need 45 minutes, 3 times washing, 3 times spin for dry. (led lights up)Air dry: it's cold air dry, this machine has not heating function, after spin, suggest use this air dry function, that will save for clothesline. 1 time need 25 minutes. (led lights up)there's more functions, please see instructionStep 7: put dirty clothes and washing liquid or powder- close lid - press star/pause button - waiting washer to finish all works.Attention pleasein process of spin for dry and wash, do not open the lid, if open lid in working status, machine will pause automatically. If continue, please press star/pause buttonIf any problem, please contact customer service