Routing is about to become more enjoyable with the DCT Universal 6.5" Inches Acrylic Router Table Base Plate Mount. This plate enhances your visibility and increases the stability of your router while accepting Porter-Cable style guide bushings. It is compatible with Porter-Cable, Ryobi, Bosch, Makita, Sears, Fein Milwaukee, Freud, Hitachi, Elu, and Dewalt routers. The transparent base allows you to see the material instead of working entirely by feel. This extra thick acrylic plate is durable but can be drilled to fit any scenario. Apply carnauba wax (not included) to the base plate to prevent scratches and allow easier gliding motion. If scratches occur, use a plastic polish to remove (not included). This package includes a base plate, alignment pin, 12 screws, and instructions. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- MAKE ROUTING ENJOYABLE: Use the DCT Universal 6.5” Inches Acrylic Router Table Base Plate Mount for Ryobi, Bosch, Makita, Hitachi, Dewalt to enhance your visibility and increase the stability of your router to complete woodworking projects such as dovetailed drawers and more
- USE YOUR ROUTER: Compatible router model numbers included Ryobi (Most models); Bosch (1615, 1617, 1618); Makita (Most models); Sears (315 275 000, 315 175 040, 315 175 050, 315 175 060, 315 175 070, 315 275 100, 315 275 110); Fein (FT 1800); Milwaukee (5615, 5616, 5619); Freud (FT2000E); Hitachi – (M8V, TR12, M12V); Elu (177); Dewalt (621, 625, 616 series, 618 series)
- EASY INSTALLATION: Mounting instructions included; align 1/4-inch collect (not included) and plate on router, install included screws, insert included alignment guide pin in collet to tighten (for setting a template guide centered on router collect); Pre-drilled and includes screws for different routers; 1-3/16-inch main hole inner diameter with 1-3/8-inch surrounding stepped diameter that creates a pocket for standard bushing
- INCREASE VISIBILITY: The transparent base is a plus when routing freehand as you can easily see the woodwork/lines for simple inlay; It is clear to show the bit contacting the material instead of working entirely by feel; Built to last with extra thick acrylic with 6.5-inch diameter and 5/8-inch thickness; acrylic material is durable but can be drilled to fit any scenario; Centering pin constructed from brass for strength and longevity
- CONTENTS: Package includes (1) base plate, (1) alignment pin, (12) machine screws, and installation instructions for your convenience; Bushings, collect, and router not included
- MAKE ROUTING ENJOYABLE: Use the DCT Universal 6.5” Inches Acrylic Router Table Base Plate Mount for Ryobi, Bosch, Makita, Hitachi, Dewalt to enhance your visibility and increase the stability of your router to complete woodworking projects such as dovetailed drawers and more
- USE YOUR ROUTER: Compatible router model numbers included Ryobi (Most models); Bosch (1615, 1617, 1618); Makita (Most models); Sears (315 275 000, 315 175 040, 315 175 050, 315 175 060, 315 175 070, 315 275 100, 315 275 110); Fein (FT 1800); Milwaukee (5615, 5616, 5619); Freud (FT2000E); Hitachi – (M8V, TR12, M12V); Elu (177); Dewalt (621, 625, 616 series, 618 series)
- EASY INSTALLATION: Mounting instructions included; align 1/4-inch collect (not included) and plate on router, install included screws, insert included alignment guide pin in collet to tighten (for setting a template guide centered on router collect); Pre-drilled and includes screws for different routers; 1-3/16-inch main hole inner diameter with 1-3/8-inch surrounding stepped diameter that creates a pocket for standard bushing
- INCREASE VISIBILITY: The transparent base is a plus when routing freehand as you can easily see the woodwork/lines for simple inlay; It is clear to show the bit contacting the material instead of working entirely by feel; Built to last with extra thick acrylic with 6.5-inch diameter and 5/8-inch thickness; acrylic material is durable but can be drilled to fit any scenario; Centering pin constructed from brass for strength and longevity
- CONTENTS: Package includes (1) base plate, (1) alignment pin, (12) machine screws, and installation instructions for your convenience; Bushings, collect, and router not included
