Build your own jigs and hold-downs with the DCT Miter Track Slot Fixture Hardware 12-Piece Kit, 3/4" x 3/8" Inch - Table Saw, Router, Disc Sander Feather Board Jig. This set is a fast way to build jigs and anchor accessories like feather (finger) boards, circle guides, hold-downs, and special jigs to your miter gauge track on a table saw, router table, disc sander, or any other tool with a standard 3/4-inch wide x 3/8-inch deep miter gauge slot. The bars fit tightly in the slot as you turn the knobs. This package includes an aluminum extrusion stop T-nut, aluminum extrusion pivot T-nut, 1/4-inch triangle thru knobs, 1/4-inch flat head screws, 1/4-inch hex set screw, washers, 1/8-inch Allen wrench hex key, plastic space, and 4mm x 20mm self-tapping screw. Miter track required, not included. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- BUILD YOUR OWN JIGS AND HOLD-DOWNS: The DCT Miter Track Slot Fixture Hardware 12-Piece Kit, 3/4" x 3/8” Inch – Table Saw, Router, Disc Sander Feather Board Jig is a fast way to build jigs and anchor accessories like feather (finger) boards, circle guides, hold-downs, and special jigs to your miter gauge track
- VARIOUS APPLICATIONS: Use the miter gauge track on a table saw, router table, disc sander, or any other tool with a standard 3/4-inch wide x 3/8-inch deep miter gauge slot
- EASY TO USE: The bars pull up tight in the slot as you tighten the knobs; Simply slide it to where you want the fixture, and when you turn the knob it expands the metal to secure the bar in the slot; Bolts lock by expanding the miter bar; The tapered head of the screw spreads the bar open so it pushes into the sides
- BUILT TO LAST: All pieces are constructed from solid metal; The included plastic knobs have metal thread inserts for maximum strength and longevity
- CONTENTS: Package includes (1) aluminum extrusion stop T-nut, (1) aluminum extrusion pivot T-nut, (2) 1/4-inch triangle thru knobs, (2) 1/4-inch flat head screws, (1) 1/4-inch hex set screw, (2) washers, (1) 1/8-inch Allen wrench hex key, (1) plastic space, and (1) 4mm x 20mm self-tapping screw; Miter track required, not included
- BUILD YOUR OWN JIGS AND HOLD-DOWNS: The DCT Miter Track Slot Fixture Hardware 12-Piece Kit, 3/4" x 3/8” Inch – Table Saw, Router, Disc Sander Feather Board Jig is a fast way to build jigs and anchor accessories like feather (finger) boards, circle guides, hold-downs, and special jigs to your miter gauge track
- VARIOUS APPLICATIONS: Use the miter gauge track on a table saw, router table, disc sander, or any other tool with a standard 3/4-inch wide x 3/8-inch deep miter gauge slot
- EASY TO USE: The bars pull up tight in the slot as you tighten the knobs; Simply slide it to where you want the fixture, and when you turn the knob it expands the metal to secure the bar in the slot; Bolts lock by expanding the miter bar; The tapered head of the screw spreads the bar open so it pushes into the sides
- BUILT TO LAST: All pieces are constructed from solid metal; The included plastic knobs have metal thread inserts for maximum strength and longevity
- CONTENTS: Package includes (1) aluminum extrusion stop T-nut, (1) aluminum extrusion pivot T-nut, (2) 1/4-inch triangle thru knobs, (2) 1/4-inch flat head screws, (1) 1/4-inch hex set screw, (2) washers, (1) 1/8-inch Allen wrench hex key, (1) plastic space, and (1) 4mm x 20mm self-tapping screw; Miter track required, not included
