I1.Materials & Plated:
Body brass nickel plated,Teflon(PTFE) Insulator for a reliable signal every time
Connectors: F-Female to F-Female 75 ohm
RoHS compliant
2.Electricail Characteristics:

Buy Now From Amazon

I1.Materials & Plated:
Body brass nickel plated,Teflon(PTFE) Insulator for a reliable signal every time
Connectors: F-Female to F-Female 75 ohm
RoHS compliant
2.Electricail Characteristics:
Impedance:75 ohm
Contact Resistance:Center conductor ≤ 1.5mΩ, Outer conductor ≤ 1mΩ
Max Power:50W
discharge current capacity(kA@8/20μS):10
Insulation Resistance :≥ 5000MΩ Durability :≥ 500 cycles
Temperature range: -40°C to +85 °C
Frequency Range up to 3 GHz
Attenuation is less than 0.2 dB
VSWR less than 1.2
3.Package include:
1 piece surge protector
4. Protects signal boosters from lightning strikes:
Prevent a lightning strike from destroying your electrical system.
The 75 ohm Lightning Surge Protector with F-Female Connectors can be installed to prevent expensive damage from incapacitating your circuitry.
The Lightning Surge Protector safeguards your amplifier and boosted devices from power surges caused by lightning strikes to antennas mounted outside
This lightning protector is specifically for 75 ohm systems.
Lightning surge protector for Coaxial cable.
They boast an insertion loss of less than 0.2 dB.
Arresters should be installed as close a possible to the equipment to be protected, often at the point where the coax cable enters the building.
They can also be installed near the antenna for additional protection.


  • 1.With F-female Connectors 75 ohm in two side, Similar to 859992 75 Ohm Lightning Surge Protector,Protects signal boosters from lightning strikes, Requires additional ground cable,
  • 2.Body brass nickel plated,Teflon(PTFE) Insulator for a reliable signal every time
  • 3. Frequency Range up to 3 Ghz / Attenuation less than 0.2 dB / VSWR less than 1.2
  • 4. It has a replaceable Gas Discharge Element with High Surge Power Capability ( 90V Gas tube)
  • 5.Surge protector should be installed as close a possible to the equipment to be protected, often at the point where the cable enters the building. They can also be installed near the antenna for additional protection
  • 1.With F-female Connectors 75 ohm in two side, Similar to 859992 75 Ohm Lightning Surge Protector,Protects signal boosters from lightning strikes, Requires additional ground cable,
  • 2.Body brass nickel plated,Teflon(PTFE) Insulator for a reliable signal every time
  • 3. Frequency Range up to 3 Ghz / Attenuation less than 0.2 dB / VSWR less than 1.2
  • 4. It has a replaceable Gas Discharge Element with High Surge Power Capability ( 90V Gas tube)
  • 5.Surge protector should be installed as close a possible to the equipment to be protected, often at the point where the cable enters the building. They can also be installed near the antenna for additional protection

Similar Products

5-Band Cell Phone Signal Booster for All Carriers Verizon AT&T 3G 4G LTE Home Office Use - Multiple Band Cellular Repeater Kit Boost Voice and Data Up to 4,500Sq FtGIMILINK (2-Pack) Gas Discharge Tube Element 90V GDT for Caoxial Lightning Surge Arrestor ProtectorWilson Electronics Pole Mount for Outside Home Antenna - 901117 - 10Amazboost Enhances Antenna Cell Phone Booster for Home Office- 4G 3G LTE Data for Verizon, AT&T, T-Mobile, Sprint Supports Up to 2500 Square Foot AreaTupavco Ethernet Surge Protector PoE+ Gigabit - Gas Discharge Tube for Full Protection - Mounting Flange - RJ45 Lightning Suppressor - LAN Network CAT5/CAT6 Thunder Arrestor - GbE 1000 Mbps TP302Skywalker Signature Series Ground Rod, 4ftweBoost Connect 4G 470103R Indoor Cell Phone Signal Booster for Home and Office - Supports 5,000 Square Foot Area (Renewed)THE CIMPLE CO - Solid Copper Grounding Wire - Proudly Made in America - Ground Protection Satellite Dish Off-Air TV Signal - UV Jacketed Antenna Electrical Shock # 10 Gauge AWG THHN - Green 25 FT