The GBC012 Boost 12-Volt OBD-II Adapter Accessory allows you to disconnect your vehicle's battery without losing onboard electronic settings, such as radio settings, clock settings, seat positions, alarms, GPS, keyless entry codes and more. It features a Type-A OBD-II 16-Pin diagnostic connector for vehicles with a 12-volt supply voltage per SAE J1962 specification. It's compatible with NOCO Boost UltraSafe Lithium Jump Starter models - GB70, GB150, and GB150.
- Disconnect your vehicle's battery without losing onboard electronic settings, such as radio and clock settings, seat positions, alarms, GPS, keyless entry codes and more.
- Easily convert a NOCO Boost UltraSafe Lithium Jump Starter into a 12-volt, 10-amp power supply for onboard memory saving during battery changes.
- Type-A OBD-II 16-Pin diagnostic connector used for vehicles with a 12-volt supply voltage per SAE J1962 specification.
- Compatible with NOCO Boost UltraSafe Lithium Jump Starter models - GB70, GB150, and GB500.
- CAUTION: This product is fused at 10-amps. Always check with the vehicle manufacturer to verify the maximum current supported through the OBD-II port. Do not use if the fuse is below 10-amps or shares a fuse with the ECU or other sensitive equipment.
- Disconnect your vehicle's battery without losing onboard electronic settings, such as radio and clock settings, seat positions, alarms, GPS, keyless entry codes and more.
- Easily convert a NOCO Boost UltraSafe Lithium Jump Starter into a 12-volt, 10-amp power supply for onboard memory saving during battery changes.
- Type-A OBD-II 16-Pin diagnostic connector used for vehicles with a 12-volt supply voltage per SAE J1962 specification.
- Compatible with NOCO Boost UltraSafe Lithium Jump Starter models - GB70, GB150, and GB500.
- CAUTION: This product is fused at 10-amps. Always check with the vehicle manufacturer to verify the maximum current supported through the OBD-II port. Do not use if the fuse is below 10-amps or shares a fuse with the ECU or other sensitive equipment.
