This is An adjustable equipment allows you to return the strut to the original camber position
after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing.
In-Kind Shooting
Specification:
Measures the Camber and Caster angle on the wheel hub or brake disc
Suitable for accurate checking of the castor and camber angle
Has a simple leveling adjustment from -5 degrees to 5 degrees
Magnetic gauge attaches to the hub or disc brake
Allows adjustment to maintain correct wheel alignment and even tyre wear
Time and money saving device
Easy to read and convenient to operate
Simple Instruction:
How to use:
1. Remove the wheel alignment sensor (Clip tool), remove the tire;
2, The magnetic level gauge carefully on the side of the suction wheel disc brakes;
3, the water level was adjusted to zero;
4, install the required location specific parts;
5, use a special tool, with the degree of magnetic level gauge indication, adjust the positioning of the part to the desired measurement angle.
6, retest with locator If there is a little deviation, just to fine-tune the vehicle. (Usually a slight deviation does not cause fault location)
Simple Reminder:
If you need very detailed adjustment instruction, You may search "wheel alignment tool" on youtube. There are some video
- This adjustable gauge allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing. Measures the Camber and Caster angle on the wheel hub or brake disc. Suitable for accurate checking of the castor and camber angle
- Top Quality: KIPA Wheel Alignment tool is made of High strength engineering materials, Accurate and durable must-tool for wheel alignment adjustment.
- Universial Automotive Tool For Wheel Alignment, Easy to use, Save you a lot of cost, You could Do the alignment works at home easily.
- Easily mounted on all kinds of metal surface.(Note:Please double check and make sure the panel is balance before using.You could screw the button behind the gauge to adjust panel level)
- The body of gauge is made of high density aluminum and precision level vial, but the mount is made of metal so that please live it away from water, or maybe it will get rusty
- This adjustable gauge allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing. Measures the Camber and Caster angle on the wheel hub or brake disc. Suitable for accurate checking of the castor and camber angle
- Top Quality: KIPA Wheel Alignment tool is made of High strength engineering materials, Accurate and durable must-tool for wheel alignment adjustment.
- Universial Automotive Tool For Wheel Alignment, Easy to use, Save you a lot of cost, You could Do the alignment works at home easily.
- Easily mounted on all kinds of metal surface.(Note:Please double check and make sure the panel is balance before using.You could screw the button behind the gauge to adjust panel level)
- The body of gauge is made of high density aluminum and precision level vial, but the mount is made of metal so that please live it away from water, or maybe it will get rusty
