Mcbazel Surecom 0014-0086 N Male Plug DC to 3.0GHz 50w Watt Dummy Load 50 Ohm Rf Coaxial Terminal;

Description:
N Male Plug DC to 3.0GHz 50w Watt Dummy Load 50 Ohm Rf Coaxial Terminal

Max input power: 50 Watt
Frequency Range: DC to 3.0GHz,VSWR: ≤1.20
Connector: N, Impedance: 50Ω
Temperature range: -55°C to +125°C
Size:44 x 72mm ( Not include plug)

Warning:
When the input power is higher than the dummy provides , it will cause the damage of the product

Why use the dummy load?
A Dummy Load is a device used to simulate an electrical load during testing. In an RF System a dummy load is used to simulate an antenna. By using a dummy load instead of an actual antenna, the transceiver can be tested and configured without radiating radio waves.

The Dummy Load is selected in a way so that it has a similar impedance to the real device that will be connected to the RF System.Not using a dummy load and leaving the port open, can result in some unwanted reflections which can damage the RF System. Also, using a real antenna in the testing phase can result in some unwanted transmission in the lab which will interfere with other devices and technologies being tested.

Packing Includes:
1 x 50W Watt 50 ohm Dummy Load