Model：MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12
----------(1)MTJNR1616H16 :
Shank Diameter （length×width）:(16*16 mm) Overall length：(100 mm)
Main declination : 93º , Shim : ST 1603 , Pin : MCT513
Clamp : HL 1814
Clamp Screw:MCS625
Wrench : L2.0 ,L3.0
Inserts : TNMG 160404 / TNMG 331 ，insert length：(16 mm) , thickness：(4 mm)
----------(2)MWLNR1616H08 :
Shank Diameter （length×width）: (16*16 mm) Overall length：(100 mm)
Main declination : 95º , Shim : SW 0804 , Pin : MCT617
Clamp : HL1814
Clamp Screw : MCS625
Wrench : L2.5 , L3.0
Inserts : WNMG 080404 / WNMG 431 , insert length：(8 mm) , thickness：(4 mm)
-----------(3) MCLNR1616H12 :
Shank Diameter （length×width）: (16*16 mm) Overall length：(100 mm)
Main declination : 95º , Shim : SC 1204 , Pin : MCT617
Clamp : HL1814
Clamp Screw : MCS625
Wrench : L2.5 , L3.0
Inserts :CNMG 120404 / CNMG 431 ,insert length : (12 mm) , thickness：(4 mm)
If you need more matching insert or 5/8" left turning holder set, you can search for B07G386Y3B , B07Q1117MJ (inserts) or B07B8XNH98 , B07TTL32HW (holder).
- ★Package Included：3pcs indexable carbide turning tool holder (MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 ) ; 3pcs indexable carbide turning inserts (CNMG431 + WNMG431 + TNMG331) ; 3 sets wrenches.
- ★Shank Diameter （length×width）: (16*16mm ≈ 5/8"x5/8" ) ; Overall Length：(100mm ≈ 3-7/8" ) ,Cutting Direction：right hand.
- ★The material of the turning tool holder is 40Cr steel, black oxide smooth finish on each turning tool holder marked with tool holder style and shank size.
- ★The material of the insert is carbide,the inserts can be used for finishing or semi-finishing steel, the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability.
- ★If you need more matching insert or 5/8" left turning holder set, you can search for B07G386Y3B , B07Q1117MJ (inserts) or B07B8XNH98 , B07TTL32HW (holder)
- ★Package Included：3pcs indexable carbide turning tool holder (MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 ) ; 3pcs indexable carbide turning inserts (CNMG431 + WNMG431 + TNMG331) ; 3 sets wrenches.
- ★Shank Diameter （length×width）: (16*16mm ≈ 5/8"x5/8" ) ; Overall Length：(100mm ≈ 3-7/8" ) ,Cutting Direction：right hand.
- ★The material of the turning tool holder is 40Cr steel, black oxide smooth finish on each turning tool holder marked with tool holder style and shank size.
- ★The material of the insert is carbide,the inserts can be used for finishing or semi-finishing steel, the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability.
- ★If you need more matching insert or 5/8" left turning holder set, you can search for B07G386Y3B , B07Q1117MJ (inserts) or B07B8XNH98 , B07TTL32HW (holder)
