Wolfwhoop Q1-M 5.8GHz 0.01/25/200/500/800mW 37CH Switchable FPV Transmitter with MMCX and Smart Audio Support OSD Configuring via Betaflight Flight Controller;

As people are having so much trouble with U.FL connectors on the Unify Pro and the Tramp VTX's. MMCX has more mating cycles and is more robust.

Feartures:
5V output for camera
2S-6S input power supported
LC filter allows ultra clean fpv video
0.01/25/200/500/800mW Switchable VTX with pigtail antenna
Integrated with Uart, connectable to betaflight FC (Support FC like Wolfwhoop OmnibusF4/OmnibusF4 Pro)
0.01mW-Power up and test your system during a race with zero interference
Support parameter remotely adjusted by Betaflight, flight controller, OSD 5V BEC output, support power for receiver and camera
LED display for indicating CH/Band/Power

Specifications:
Operating Voltage: 7 - 24V
Power supply: 5V camera@under 0.3A max
Output power:
25mw: 100mA @12v
200mw: 180mA @12v
500mw: 250mA @12v
800mw: 300mA @12v
Range: Up to 4km with omnidirectional RHCP antennas
Antenna type: pigtail antenna Antenna connector: MMCX to RP SMA Female
Video Format: NTSC/PAL
Port connector: JST,6pin
Dimensions: 26(H)x19(W)x8(D)mm
Weight:6.7g(with pigtail antenna)

Note :

5645/5925/5945(E4/E7/E8) are not available sue to FCC regulation. Selecting 5645/5925/5945(E4/E7/E8) will be invalid action.

37 channels are all above 5650 and below 5925MHz, which are legal to use in the USA with an amateur radio license.

This equipment is being sold under FCC's amateur radio rules. Operators must require amateur radio license to operator legally in the US. Use of amateur equipment without a license or use of equipment on restricted frequencies could subject the operator to significant fines by the FCC. By purchasing this equipment, the user is agreeing that they understand these responsibilities and will operate the equipment legally. More information related to ARL, please go to http://www.arrl.org/getting-licensed.