This Bat System - One 12" Round Outer Bat Adapter & Six Rounded Square 7" Inserts allow for the throwing pots with a base 7" or smaller. Fits standard wheel heads with bat pin holes spaced 10" apart (measured from the centers). Each insert can be easily lifted from the insert tab in the outer bat. The outer bats are also easy to slide on and off wheel head bat pins.
The outer bat is made out of an exterior-grade wood material, and is very strong and warp- and water-resistant, but it can be damaged with long-term exposure to water. To protect your bat system, do not leave outer bat or inserts sitting in water, and gently clean and dry outer bat and inserts on their sides.
Additional inserts can be ordered separately from Amazon at https://www.amazon.com/Inserts-Satin-Additional-Adapter-Potters/dp/B0764MBG57/.
Product Details
- One Outer Bat: 12" diameter x 1/2" thick
- Outer Bat holes drilled for standard 3/8" diameter bat pins spaced 10" apart on center
- Six Inserts: 7" rounded squares x 1/4" thick, made out of Masonite
If you need additional inserts, you can order them separately from Amazon at https://www.amazon.com/Inserts-Satin-Additional-Adapter-Potters/dp/B0764MBG57/.
- EASY TO USE: Bleecker Station's Bat System is easy to use - simply lift inner bats from the insert tab in the outer bat using your fingers or a flat potter’s tool. The outer bat has holes drilled through and is also easy and to slip onto and off your pottery wheel pins. Fits standard wheel heads with pin holes spaced 10” apart on center.
- SAVE SPACE: Save precious space in your ceramics studio by drying your pots on small square inserts instead of regular round bats, which can take up a foot of space or more on your shelves.
- MORE ENJOYABLE: Masonite absorbs water allowing your pot to release itself as it dries, which is safer than cutting it off the wheel head with a wire and risk deforming or dropping it or leaving your fingerprints on the clay. Make throwing more enjoyable by eliminating the wiring off step altogether!
- SAFE: Insert tab is wide enough to prevent fingers from getting caught while throwing on the wheel.
- DURABLE: The inserts are made out of Masonite and the outer bat is made out of a water resistant, durable exterior-grade wood material. This bat system is designed to accommodate swelling from exposure to water, so unlike other bat systems the inserts should still fit into your adapter use after use. <p> MADE IN THE USA.</p>
- FREE: Bat Pins Included.
- EASY TO USE: Bleecker Station's Bat System is easy to use - simply lift inner bats from the insert tab in the outer bat using your fingers or a flat potter’s tool. The outer bat has holes drilled through and is also easy and to slip onto and off your pottery wheel pins. Fits standard wheel heads with pin holes spaced 10” apart on center.
- SAVE SPACE: Save precious space in your ceramics studio by drying your pots on small square inserts instead of regular round bats, which can take up a foot of space or more on your shelves.
- MORE ENJOYABLE: Masonite absorbs water allowing your pot to release itself as it dries, which is safer than cutting it off the wheel head with a wire and risk deforming or dropping it or leaving your fingerprints on the clay. Make throwing more enjoyable by eliminating the wiring off step altogether!
- SAFE: Insert tab is wide enough to prevent fingers from getting caught while throwing on the wheel.
- DURABLE: The inserts are made out of Masonite and the outer bat is made out of a water resistant, durable exterior-grade wood material. This bat system is designed to accommodate swelling from exposure to water, so unlike other bat systems the inserts should still fit into your adapter use after use.
MADE IN THE USA.
- FREE: Bat Pins Included.
