SFR1M44-U100 USB Floppy Drive Emulator is a floppy drive emulator That high security data protection features, easy installation and user-friendliness. This floppy drive emulator is great for industrial equipment control.
Feature:
Plug and play
High security data protection
Easy to install and user-friendly
The USB stick is FAT32 used
A built-in memory used to s tore Between data and convert format FAT16/32 and FAT12, Retains data even power down
Great for industrial control equipment with 1.44MB floppy drive
Specification:
Model: SFR1M44-U100
Compatible with: Industrial Control equipment with 1.44MB floppy drive
Voltage: 5V DC
Interface: USB port, 4 pin power plug (Power), 34 pin plug (Standard floppy drive)
Housing Material: ABS
Color: Gray
Package Includes:
1x USB Emulator
4xScrews
Note: You can download the software and instructions in this link:http://www.goteksystem.com/index.php?_m=mod_product&_a=prdlist
If you cannot download ,please contact us to send the file .
Thank you .
- GoTEK 3.5 Inch USB Floopy Disk Drive uses normal USB flash drive as the medium for transfer design. 1.44MB SFR1M44-U100 USB Emulator equipped with 34pin floppy driver interface, 5V DC power supply, easy to install.
- 【USB Emulator Capacity】--1.44MB 2HD Cylinders: 80 Tracks: 160 Sectors/Track: 18 Bytes/Sector: 512 Data transfer rate: 500 kbps Encoding method: MFM. 1000pcs partitions in usb flash drive can be used. This floppy drive simulator is perfect for embroidery machine and industrial control equipment of 1.44MB floppy disk drive
- 【Attention in Installation】 -- Do not be reverse when installing the cable; The USB drive must be formatted into 1.44M FAT12 format , then it could be identified by our GOTEK emulator.
- 【IMPORTANT TIPS】-- The default loaded firmware is from the GOTEK manufacturer, support 1.44M, 34pin - IBM/PC interface, the format is DOS/FAT12, and the chip is AT32F415 Cortex-M4, so please make sure your machine could support these important points.
- If you would like to use our Gotek floopy emulator on AMIGA, you need to change our default firmware to FlashFloppy firmware first.
- GoTEK 3.5 Inch USB Floopy Disk Drive uses normal USB flash drive as the medium for transfer design. 1.44MB SFR1M44-U100 USB Emulator equipped with 34pin floppy driver interface, 5V DC power supply, easy to install.
- 【USB Emulator Capacity】--1.44MB 2HD Cylinders: 80 Tracks: 160 Sectors/Track: 18 Bytes/Sector: 512 Data transfer rate: 500 kbps Encoding method: MFM. 1000pcs partitions in usb flash drive can be used. This floppy drive simulator is perfect for embroidery machine and industrial control equipment of 1.44MB floppy disk drive
- 【Attention in Installation】 -- Do not be reverse when installing the cable; The USB drive must be formatted into 1.44M FAT12 format , then it could be identified by our GOTEK emulator.
- 【IMPORTANT TIPS】-- The default loaded firmware is from the GOTEK manufacturer, support 1.44M, 34pin - IBM/PC interface, the format is DOS/FAT12, and the chip is AT32F415 Cortex-M4, so please make sure your machine could support these important points.
- If you would like to use our Gotek floopy emulator on AMIGA, you need to change our default firmware to FlashFloppy firmware first.
