YIKESHU NESPI CASE+, Retroflag Nespi Case+ Plus Functional Power Button with Safe Shutdown for Raspberry Pi 3 B + (B Plus) 2 &Small Cooling Fan
Product description:
Safe Shutdown and Safe Reset
Functional LED power indicator
Functional POWER and RESET buttons
NES case specifically designed for Raspberry Pi 3 B+ (B Plus) 2
Easy access to the SD-Card and all other ports without opening the case
The Dimension are as follow:
3 5/8" in Length 3 3/16" in Width 1 3/8" in Height The order comes as 4 individual pieces:
1 - Bottom plate, 1 - Top plate w/ lid attached
2 - Case Clips (Note: this case DOES NOT include a Raspberry Pi).
We also include 4 rubber feet to place on the bottom of the unit to help prevent it from sliding.
It is quick and easy to use and assemble:
1) Simply place your Raspberry Pi 2 or Pi 3 into the bottom plate lining up the 4 holes of the Pi up with the 4 pegs. (Make sure to remove your SD card before seating the Pi.)
2) Take the top case and place it onto the pegs and seat firmly.
3) Place the clips that are labeled with F for Front and B for Back and slide them into the open slots on the top and bottom cases.
- This kit contains an ABS case and a 3.5-inch resistive touch screen. It’s fully compatible with Raspberry Pi 4 Model B. NOTE: Raspberry Pi Board NOT Included! The fan and screen can be installed at the same time.
- Raspberry Pi 4 Screen Case - Pi 4-inch touch screen compatible with raspberry pi 4 b/4b/4 model b. Display ONLY Support System - Raspbian, Kali-Linux, Ubuntu, Octopi.
- The screen support 125MHz SPI signal input and the refresh rate is about 50fps which is enough to play videos or games and display stable without flicker
- Packaging Content - you will receive a raspberry pi screen, a raspberry pi heatsink, a 30mm cooling fan, and a screwdriver, Good looking, can make your LCD case looks cooler than others.
- After Sales - If you have any questions, please feel free to contact us, and we will try our best to solve the problem within 24 hours.
- This kit contains an ABS case and a 3.5-inch resistive touch screen. It’s fully compatible with Raspberry Pi 4 Model B. NOTE: Raspberry Pi Board NOT Included! The fan and screen can be installed at the same time.
- Raspberry Pi 4 Screen Case - Pi 4-inch touch screen compatible with raspberry pi 4 b/4b/4 model b. Display ONLY Support System - Raspbian, Kali-Linux, Ubuntu, Octopi.
- The screen support 125MHz SPI signal input and the refresh rate is about 50fps which is enough to play videos or games and display stable without flicker
- Packaging Content - you will receive a raspberry pi screen, a raspberry pi heatsink, a 30mm cooling fan, and a screwdriver, Good looking, can make your LCD case looks cooler than others.
- After Sales - If you have any questions, please feel free to contact us, and we will try our best to solve the problem within 24 hours.
