Details:
Work Voltage:DC12 V
Maximum Work Current:10A
Air Flow:40L/min
Power Cord Length:11.48ft(3.5M)
Suggest Maximum pressure: 60PSI
Continuous Work Time:12min
Dimensions: 23.5 * 15.5 * 9CM
Tip:
1.Start the vehicle engine.
2.Plug the power cable into vehicle 12V cigarette lighter.
3.Plug the inflatable nozzle on tire air valve, once you hear leak noise quickly press the fixed level down to lock it in place
4.Press the "R" button to select unit and "-""+" button to set target pressure value.Wait for 3 seconds, The LED display value stops flashing, that set OK.
5.press the start button.
6.The compressor will stop at the pre-set pressure value.
Note:
1, Did not wait until the display value stops flashing, Press the Start button is not enabled. Wait for 3 seconds, The LED display value stops flashing,that set OK.Then press the start button.
2, Need the air pump inflatable mouth with the tire inflatable port to docking good, so as to show the exact tire pressure.
Package:
1 * portable digital display inflatable pump
1 * Portable bag
1 * Metal nozzle needle
1 * Red nozzle needle
1 * Blue nozzle needle