Which combination should I get?Â
Both the 400/1000 grits and the 1000/6000 grits can make your knife very sharp and they are both perfect for general use at home.The difference is that 400/1000 can also fix damaged knives and 1000/6000 make your knife extremly sharp. So If it is for general home use, both stones's result will meet up your needs. But if you are a professional knife user, for example a chef, hunter or knife makers, you will the need the 6000 grits to keep your knife razor sharp.
Grits Range and their purpose
120-400 grit
For repairing damaged knives/edges.
600-2000 grit
Used to sharpen dull but not damaged knives.
3000-8000 grit
These are finishing stones and are used to achieve razor-sharp results.
Instructions
1. Fully immerse the whetstone in water and soak until bubbles no longer appear (approx. 5-10 minutes).
2. Place the waterstone together with the rubber base on a steady surface.
3. Use lower grit side of the knife sharpener for rough grinding. Move the blade back and forth at an angle of 10-30 degrees, applying gentle pressure. Starting at the tip of the blade, continue through the middle section to finish at the base. Continue to apply water while sharpening. Repeat previous step on opposite side of blade.
4. Turn over whetstone. Repeat sharpening process on higher grit side for fine grinding.
5. Clean sharpening stone set and place in well-ventilated area to dry.
Sharpening Stone Set Including:Â
1*100/4000 double side whetting stone
1*Rubber base
1*user manual
1* bonus honing guide.
- ✅【400 GRIT SIDE】- This is the coarse grit side, ideally used for repairing your dull or damaged tools. If your tool is dull, your sharpening process will start with this side. Keep in mind, while sharpening, that the stone will continue to require water for lubrication and care of the stone.
- ✅【1000 GRIT SIDE】- After a repair with the 400 grit side, the 1000 grit side will hone the tool to a sharp edge. The resulting sharpness will be adequate for any common kitchen tasks, or daily usage.
- ✅【SUPERIOR BUNDLE】- Along with this stone, you will get all you need for a professional sharpening, including a rubber base that holds your stone safely during sharpening, an angle guide that will assist new users to find the correct sharpening angle, and a user manual that will inform you of the optimal way to get results from the stone .
- ✅【MULTI-PURPOSE USE】- Measuring at 18cm x 6cm x 3cm, the Trilancer whetstone is suitable for a wide range of blades including kitchen knives, hunting knives, pocket knives, scissors, chisels, razors, hatchets, axes, as well as carving and gardening tools– with the only exceptions being serrated and ceramic blades.
- ✅【400 GRIT SIDE】- This is the coarse grit side, ideally used for repairing your dull or damaged tools. If your tool is dull, your sharpening process will start with this side. Keep in mind, while sharpening, that the stone will continue to require water for lubrication and care of the stone.
- ✅【1000 GRIT SIDE】- After a repair with the 400 grit side, the 1000 grit side will hone the tool to a sharp edge. The resulting sharpness will be adequate for any common kitchen tasks, or daily usage.
- ✅【SUPERIOR BUNDLE】- Along with this stone, you will get all you need for a professional sharpening, including a rubber base that holds your stone safely during sharpening, an angle guide that will assist new users to find the correct sharpening angle, and a user manual that will inform you of the optimal way to get results from the stone .
- ✅【MULTI-PURPOSE USE】- Measuring at 18cm x 6cm x 3cm, the Trilancer whetstone is suitable for a wide range of blades including kitchen knives, hunting knives, pocket knives, scissors, chisels, razors, hatchets, axes, as well as carving and gardening tools– with the only exceptions being serrated and ceramic blades.
