Adjustable hole cutter kit
Cutting hole diameter: 1-5/8" to 8" (40mm - 200mm)
Cutting depth: up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides
Shank: 3-flat shank
Infinite adjustment and measure bar is marked in inches and metric system
Used for recessed lights and ceiling speakers installation hole cutting, skylights, vent holes cutting
Application materials: Sheetrock, Drywall, Plaster, Ceiling Tile, Soft Acoustic Tile, Plastics, Fiberglass, Acrylic Sheet, Soft Wood and Plywood
User Instruction
It requires a hand drill with a 3/8"(10mm) or larger chuck to cut holes from 1-5/8"(40mm) to 8"(200mm) in diameter and materials up to 3/4"(19mm) thick from one side, 1-1/8"(30mm) thick from two sides
Caution
* When cutting into walls, floors or ceilings, always check to ensure that no electric cables or water pipes etc are in the vicinity of the proposed cut
* Always keep the cutting blades sharp
* Do not use undue force, or too great a drill speed, suggested cutting speeds
Hole Diameter(mm) Drill Speed(RPM)
40 - 49 --------------- 800
50 - 69 --------------- 600
70 - 89 --------------- 400
90 - 119 -------------- 200
120 -180 -------------- 100
* Ensure the cutting blade holders are tight before use
* Make sure to measure the CUTOUT for the product (speaker, recessed light) you are installing. The size of the product you are installing uses a larger cutout, and the needed size is different by manufacturer of the canned light or the speaker
* Screw the wing nut on to the threaded end of the spindle so that that assembly is secure
* As with any new tool, always test on a scrap piece of material to get familiar with the tool
- Professional Cutting - Hole saw cuts smooth and even 8" diameter holes through wood, drywall, plaster and plastic; Cutting depth up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides.
- Safe & Clean - Ball bearing mounted ABS dust shield with soft silicon rubber gasket to trap the dust and shavings to prevent them from going airborne and making mess in your furnished home. It is also safe to use as protection equipment for hole cutting application.
- Easy to Use - Includes everything you need to do-it-yourself, mandrel and drill bit work with any 3/8" drills & up.
- Complete Set - This kit includes one professional grade adjustable hole cutter with two replaceable pilot drill bits (1x auger type Self-Feed pilot bit + 1x HSS pilot bit), two sets of replaceable cutting blades (1 set of high speed steel blades + 1 set of tungsten carbide blades), one ABS dust shield, one adjustment hex wrench, 5 Pcs brad-point wood drill bits and 5 Pcs Masonry drill bits 5/32", 3/16", 1/4", 5/16, 3/8", one 2m tape measure, a durable storage case and user's manual.
- Convenient & Save Money - One hole cutter kit replaces of dozens of hole saws for faster, safer, easier cutting of exactly the hole size needed. It is a very practical tool set for carpenters, home decorators, contractors, professionals and DIY home owners for recessed lights, ceiling speakers, vent holes and other hole cutting application.
- Professional Cutting - Hole saw cuts smooth and even 8" diameter holes through wood, drywall, plaster and plastic; Cutting depth up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides.
- Safe & Clean - Ball bearing mounted ABS dust shield with soft silicon rubber gasket to trap the dust and shavings to prevent them from going airborne and making mess in your furnished home. It is also safe to use as protection equipment for hole cutting application.
- Easy to Use - Includes everything you need to do-it-yourself, mandrel and drill bit work with any 3/8" drills & up.
- Complete Set - This kit includes one professional grade adjustable hole cutter with two replaceable pilot drill bits (1x auger type Self-Feed pilot bit + 1x HSS pilot bit), two sets of replaceable cutting blades (1 set of high speed steel blades + 1 set of tungsten carbide blades), one ABS dust shield, one adjustment hex wrench, 5 Pcs brad-point wood drill bits and 5 Pcs Masonry drill bits 5/32", 3/16", 1/4", 5/16, 3/8", one 2m tape measure, a durable storage case and user's manual.
- Convenient & Save Money - One hole cutter kit replaces of dozens of hole saws for faster, safer, easier cutting of exactly the hole size needed. It is a very practical tool set for carpenters, home decorators, contractors, professionals and DIY home owners for recessed lights, ceiling speakers, vent holes and other hole cutting application.
