Solar Powered LED Street Light - Remote Control Pathway LED Lights - 3000Lm;

Adaptive Lighting System to achieve full night lighting if the weather changes, this is known as constant current output. Variable Frequency Technology controls and adjusts the LED driver frequency to reach the max output of LED and Battery. Temperature Control Systems to Protect the battery charging and discharging in high temperatures. 10 hours for a full charge battery by standard sunlight. Once the battery is fully charged, it can support 3 nights of lighting. SC Seoul LED Chips - 160 lumens/w (40 LED Chips) There are 3 different lighting modes 1. Continuous brightness for allotted time 2. Dim lighting + motion sensor mode 3.Timer lighting mode where the light is programmable for a certain time limit Preset Lighting Modes in More Detail: M1 10% brightness + PIR (full brightness for 30 seconds) for 12 hours - once you click on this mode, it will stay in M1 until the setting is changed. M2 Initial default setting mode: 0hrs of brightness + PIR (full brightness for 30 seconds) for 12 hours. This will stay in M2 until the setting is changed. Lighting Modes Via Controller a. You can choose different brightness for whole night 10%, 30%, 60%, 100%. (Not recommended since the 100% lighting mode of full brightness can use the entire battery in 1 night) b. You can choose different brightnesses and time 1/2/3/4/6*/8* hours (ex. 30% for 4 hours) - once the selected mode is completed, it will automatically initiate M2 for the remainder of the night. This mode has a memory function, therefore it will keep same light every night until you change it to another mode. *To access 6 and 8 hours, simply move the switch from OFF to ON next to the batteries on the back of the remote, under the protective cap. If switched to "ON", T1 = 2hrs, T2 = 4hrs, T3 = 6hrs, T4 = 8hrs.