12V Wired PIR Motion Detector Alarm Infrared Sensor 360 Degree Detection Ceilling Mounted Installation Relay NO.NC Optional;

Features

1.Jumper optional for alarm delay 5 seconds/30 seconds
Insert the jumper: Alarm delay about 30 seconds(default)
Without jumper: Alarm delay about 5 seconds
2.The jumper for detection sensitivity: 1P/2P
Insert the jumper: Choose 1P, high sensitivity (default)
Without jumper: Choose 2P, low sensitivity
3.Normal closed (NC) and normal open (NO) Adjustable
Insert the jumper: Normal Closed (Default)
Without jumper: Normal Open
4.Jumper for controlling LED indicator
Insert the jumper: LED on when triggered(default)
Without jumper: LED off when triggered
5.Detection Distance adjustable
The jumper for detection distance:
5M: detection distance is about 5M
6M: detection distance is about 6M
7M: detection distance is about 7M
Specification

Working voltage: DC9V to 12V
Consumption current: less than 20mA
Low Pressure failure: Less than DC8.5V
Working temperature: -10 to +50
Centi Degree Installation way: Ceiling Mounted Appreance
Size: 106 x 36mm
Self-test time (Self Warm-up): about 60s LED
indicator: red Alarm
output: N.O/N.C optional
Connection capacity: DC12V, 300mA
Anti-tamper switch: N.C without relay output
Connection capacity: DC12V, 300mA
Note

1.it is Wiring Ceiling Mounted PIR Motion Detector, not wireless type. User must connect it to wired alarm control panel or other wired equipments via wiring connection.
2. Before buy, please make sure you are a proffessional wired detector buyer, who can understand the wiring terminals and know how to connect it to your wired equiments in order to avoiding wrong item ordered.
3. Please cover the top cover during test.