Campbell Hausfeld 'Get Stuff Done' Angle Die Grinder - 20,000 RPM with Flow Adjustment (XT251000);
Campbell Hausfeld 'Get Stuff Done' Angle Die Grinder - 20,000 RPM with Flow Adjustment (XT251000)

The Campbell Hausfeld get stuff done angle Grinder (XT251000) boasts the power to handle grinding, porting, smoothing, polishing and deburring while making it easy to reach tight spaces. With a 20, 000 free speed RPM and a ....

Buy Now From Amazon

The Campbell Hausfeld get stuff done angle Grinder (XT251000) boasts the power to handle grinding, porting, smoothing, polishing and deburring while making it easy to reach tight spaces. With a 20, 000 free speed RPM and a .2 Horsepower motor, the XT251000 moves material quickly and efficiently. An easy valve adjustment located on the side of the housing regulates air flow for whatever output you need to get stuff done! the inch collet makes this angle die Grinder compatible with most standard bits. This die Grinder boasts a lightweight composite design (1.1 lbs.), and a rubberized, comfort grip for a user friendly experience. Average air consumption of 2.8 CFM @ 90 PSI. Maximum pressure of 90 PSI. Air inlet size of inch NPT (F). minimum hose size of 3/8 inch. An air compressor with a tank gallon capacity of 20 gallons or larger is recommended. Get stuff done faster and easier with Campbell Hausfeld. The Air Power Expert

  • The angled design makes it easy to tackle grinding, porting, smoothing, polishing and deburring, even in hard to reach areas
  • An easy valve adjustment located on the side of the housing regulates air flow for whatever output you need to get stuff done
  • Average air consumption of 2.8 CFM @ 90 PSI. Max PSI of 90. Air inlet size of ¼” NPT (F). minimum hose size of 3/8”. Get stuff done faster and easier with Campbell Hausfeld. The Air Power Expert
  • Angle die grinder
  • The angled design makes it easy to tackle grinding, porting, smoothing, polishing and deburring, even in hard to reach areas
  • An easy valve adjustment located on the side of the housing regulates air flow for whatever output you need to get stuff done
  • Average air consumption of 2.8 CFM @ 90 PSI. Max PSI of 90. Air inlet size of ¼” NPT (F). minimum hose size of 3/8”. Get stuff done faster and easier with Campbell Hausfeld. The Air Power Expert
  • Angle die grinder

Similar Products

Campbell Hausfeld XT200000 Air Cut Off Tool, 3ProTool 5542 Roloc Disc Pad Holder Shank, 2INSMA 2 inch Roloc Quick Change Discs 30Pcs Sanding Discs 1Pcs 1/4'' Holder, Surface Conditioning Discs, for Die Grinder Surface Prep Strip Grind Polish Finish Burr Rust Paint RemovalDRILLPRO 70Pcs Sanding Discs Set, 2 inch Roloc Quick Change Discs with 1/4 inch holder, Surface Conditioning Discs for Die Grinder Surface Strip Grind Polish Burr Finish Rust Paint Removal(Updated)2 Inch Sanding Discs by LotFancy, 45PCS Roll Lock Surface Conditioning Discs, Fine Medium Coarse Assorted Pack, R-Type Quick Change Disc with Disc Pad Holder, for Die GrinderCoceca 5 Pack Roloc Disc Pad Holder, Universal Quick Replacement 2 Inches, 3 Inches and 1 inch Disc Pad Holder with a Quarter Inch Shank for Polishing Round Rotating ToolsShark 12704 3-Inch by 1/16-Inch by 3/8-Inch Double Reinforced Cut-off Wheels, 54-Grit, 10-PackWeiler 56490 Tiger Mounting Mandrel For 1