High quality ignition coil for the Honda trail bikes from the 70's. It comes with a condenser for a quick and easy installation! Get that MT250 sparking again and back on the trails!

Specifications:

Mounting Hole S...

Buy Now From Amazon

High quality ignition coil for the Honda trail bikes from the 70's. It comes with a condenser for a quick and easy installation! Get that MT250 sparking again and back on the trails!

Specifications:

Mounting Hole Spacing: 35mm (1.4") (measured center to center)
Lower Hole Spacing: 65mm (2.5") measured center to center)
Overall Width: 99mm (3.9") (including condenser)
Coil Length: 42mm
High Tension Wire Length: 22" (spark plug wire)
Low Tension Wire Length: 16" (male bullet terminals)
Primary Resistance: 1.8 ohms +/- 10%
Secondary Resistance: 11k ohms +/- 10%
Voltage: 6V

Replaces Honda part number: 30500-950-405

Fits Honda:

XL100 - 1977-1978
CT125 Trail - 1977
MT125 Elsinore - 1974-1976
TL125 Trials - 1973-1976
XL125 - 1974-1978
MR175 Elsinore - 1975-1977
XL175 - 1976-1978
FL250 Odyssey - 1977-1980
MT250 Elsinore - 1974-1976
XL250 Motosport - 1972-1975
XL350K - 1974-1975



  • Mounting Hole Spacing: 35mm (1.4") (measured center to center)
  • Sold individually.
  • Check Fitment Below
  • Mounting Hole Spacing: 35mm (1.4") (measured center to center)
  • Sold individually.
  • Check Fitment Below

Similar Products

Points - Nippondenso Ignition ONLY - 30202-107-004 - Fits Honda CL/CT/S/SL/ST90 CB/CL/SL/XL100 CB/CL/CT/SL/TL125 CA/CB/CL160 CA/CB/SL/XL175 CB/CL200 XL250/350NGK LB05FP Resistor Spark Plug Capi5 Front Brake & Clutch Levers for Honda CB CJ CL CM CR CT MR MT SL TL XL XR 90 100 125 175 185 200 250 350 360 400 450 500Fuel Petcock Petcock For Honda CB100 CB125 XL125 XL350 CL70 CL125 CB175 SL100 (180 Degree outlet fitting)NGK LB05EP Resistor Spark Plug CapUSPEEDA Throttle Cable Handle Bar Set Grip Casing for Honda XL100 XL125 XL175 XL250 XL350 XL70 XL75 XR100 XR185 XR200 ZB50 TL125 TL250 TR200 CS90