Production Steps
1 Test whether the air pumps are in proper functioning.
2 Connect the wire according to Figure 3, and test whether the button switches are in normal functioning.
3 Paste the carton, and the carton size is as shown in Figure 4. Open holes for the button switches and silicone tubes, and then install the button switches.
4 Open two holes - one large and one small - in the bottle caps, and insert the silicone tubes as shown in Figure 5.
5 Put 3 bottles of drink into the carton, twist the bottle caps, connect the wire to the button switches, and seal the top.
6 You can play your talent of drawing on the carton to make it more beautiful.
Note: A hot glue gun and an electric soldering iron will be used during the production process. Please take care of safety, and children under the age of 16 should operate accompanied by adults.
About the pumps:
input Voltage:DC 6V or 9V
Max Current: <350mA
Max Pressure: 690mmHg
Noise: <60dB
Red point side is battery +
- Do you want to have a very cool Drink fountain machine? Don’t hesitate, and get started right now. You can own it by only one hour of simple handcraft.
- This is an excellent Family & Kids program, which not only allows families to own a distinctive Drink fountain machine,but also enables children to understand some scientific principles more intuitively and to improve their operational ability.
- This product suite contains: three 6V air pumps, three button switches, one 6.5ft 5mm*7mm silicone tube, one 3.2ft 3mm*5mm silicone tube, one battery connection button, one 2M wire (Note: exclude battery, and you need to find a good-quality carton as the housing material of the Drink fountain machine)
- You can search relevant production teaching videos on the Internet, and of course you can develop your own talent and wisdom to conduct a product improvement, in order to make it perfect.
- Children under the age of 16 should carry out the production accompanied by adults
- Do you want to have a very cool Drink fountain machine? Don’t hesitate, and get started right now. You can own it by only one hour of simple handcraft.
- This is an excellent Family & Kids program, which not only allows families to own a distinctive Drink fountain machine,but also enables children to understand some scientific principles more intuitively and to improve their operational ability.
- This product suite contains: three 6V air pumps, three button switches, one 6.5ft 5mm*7mm silicone tube, one 3.2ft 3mm*5mm silicone tube, one battery connection button, one 2M wire (Note: exclude battery, and you need to find a good-quality carton as the housing material of the Drink fountain machine)
- You can search relevant production teaching videos on the Internet, and of course you can develop your own talent and wisdom to conduct a product improvement, in order to make it perfect.
- Children under the age of 16 should carry out the production accompanied by adults
