Specification:
Needs 5/8 inch or 16mm diameter opening to install.
Fits dispenser wall up to 11/16 inch or 17mm thick.
Material:304 Stainless steel.
Thread Pitch: 1.25MM/0.05 inch.
Package includes:
1 x stainless steel spigot;
2 x stainless steel washer;
2 x silicon gasket;
1 x stainless steel nut;
1 x Anti-Clogging Cap;
Installation Steps:
1.Remove the Anti-Clogging Cap from the spigot;
2.Put a metal washer on the spigot;
3.Put a silicon gasket next to the metal washer;
4.Put the half assembled spigot through the hole of the dispenser;
5.Take another silicon gasket and put on the spigot from the inside of your jug/vessel;
6.Add another metal wash behind the gasket;
7.Put the nut and tighten it slowly;
8.Put the Anti-Clogging Cap on the end and tighten it. (Please avoid over tighten if your dispenser is glass)
Kindly Remind:
1. Make sure the Mounting Hole Size before purchasing.
2. Before installation, wash the stainless steel spigot in soapy water and rinse suggested .
3. Do not over-tighten, it could crack the dispenser made of fragile material like glass or ceramic.
4. If used for sugary drink, we suggest that remove the spigot from the dispenser and clean thoroughly.
- Quick Installation: This Beverage Dispenser Spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick and for flat surface can fit up to 1 inch hole
- High Quality: This beverage spigot is made up of food-grade 304 stainless steel and Come with stainless steel Anti-Clogging Cap, no lead and it will not rust
- Multi-Function: This beverage spigot is great for use in beverage dispenser, wine barrel, beer equipment, coffee machine and other drink dispenser
- Heavy Duty: This stainless steel spigot is solid and heavy duty. It is designed to replace those cheap, easy break and leak plastic spigots of drink dispenser, beverage dispenser jar or sun tea jar
- What's in the BOX: Each set contains 1 spigot, 2 stainless steel washer, 2 silicon gasket, 1 stainless steel nut, 1 Anti-Clogging Cap. 1 set of drink dispenser spigot can be used for a long time
- Quick Installation: This Beverage Dispenser Spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick and for flat surface can fit up to 1 inch hole
- High Quality: This beverage spigot is made up of food-grade 304 stainless steel and Come with stainless steel Anti-Clogging Cap, no lead and it will not rust
- Multi-Function: This beverage spigot is great for use in beverage dispenser, wine barrel, beer equipment, coffee machine and other drink dispenser
- Heavy Duty: This stainless steel spigot is solid and heavy duty. It is designed to replace those cheap, easy break and leak plastic spigots of drink dispenser, beverage dispenser jar or sun tea jar
- What's in the BOX: Each set contains 1 spigot, 2 stainless steel washer, 2 silicon gasket, 1 stainless steel nut, 1 Anti-Clogging Cap. 1 set of drink dispenser spigot can be used for a long time
