External Sound Card USB 6 Channel 5.1 Audio
This external sound card offers a quality solution for upgrading your PC or laptop audio.
This device supports 32 KHz, 44.1 KHz and 48 KHz sampling rate in digital and analog recording, and in digital/analog audio playback.
In digital playback mode, it receives an audio stream from the PC via a USB interface and transmits audio data according to AES/EBU, IEC60958, S/PDIF consumer interface standards. Only R, L channel PCM audio in 5.1 channel can be conveyed in digital playback mode. In analog playback mode,it supports 6 channels codec for analog playback.
In digital recording mode,it receives S/PDIF digital audio input and sends back to PC through USB.Three sampling rates;includes 32KHZ,44.1KHZ are automatically locked internally,in analog recording mode,fixed 48khz sampling rate is supported by analog audio recording.
Specifications:
External 6 channel (5.1) sound card.
Easy to install.
Inputs: SPDIF in, Line in, Mic in.
Outputs: SPDIF out, Front out, Rear out, Cen/Bass out.
Supports 32KHz, 44.1KHz and 48KHz sampling rate in digital and analog recording.
Contents:
1 x USB 2.0 sound card
1 x Driver CD
1 x USB cable
NOTE:
If you need to download the driver, please feel free to clik the link: http://www.drivers-download.com/Drv/C-Media/CM6206/Xear_3D_7.1.zip
- USB 6 Channel 5.1 External Sound Audio Card for PC Laptop OS support: win 10/ 9/ 8 / XP / 2000 / Vista. External sound card USB 6 channel 5.1 audio. Record & play back digital and analog audio without sound card in your computer.
- USB sound is and USB audio controller. It supports 32KHz, 44.1KHz. (which two need driver or application software support) and 48KHz sampling rate in digital recording, 48KHz sampling in digital nalog audio playback.In digital playback mode, itreceives audio stream form PC via USB interface and transmits audio data according to the AESEBU, IEC60958, SPDIF cnsumer interface standards. Only R L channel PCM audio in 5.1 channel can be conveyed in digital playback mode.
- In analog playback mode, it supports 6 channels codec for analog playback In digital recording mode, it receives SPDIF digital audio input and sends back to PC through USB. Three sampling rates, includes 32KHz,44.1KHz are automatically locked internally. In analog recording mode, fixed 48KHz sampling rate issupportedby analog audio recording.
- If you want the fiber output to support 5.1-channel output, you must have the following conditions:1.The sound source must be DTS 5.1 channels, such as 3D games, HD movies. If it is a general MP3 or general 2-channel video, you can only have 2-channel effect.
- The player settings are important: if it is set up with PowerDVD software from the fiber output "Passthrough" through. Meaning that the sound card is only responsible for the fiber signal output, not decoding. Dispensers strongly recommend KMP this player, the function is very powerful。3. After the fiber output must be AC3 / DTS decoder, or built-in AC3 / DTS decoder amplifier and the like.
- USB 6 Channel 5.1 External Sound Audio Card for PC Laptop OS support: win 10/ 9/ 8 / XP / 2000 / Vista. External sound card USB 6 channel 5.1 audio. Record & play back digital and analog audio without sound card in your computer.
- USB sound is and USB audio controller. It supports 32KHz, 44.1KHz. (which two need driver or application software support) and 48KHz sampling rate in digital recording, 48KHz sampling in digital nalog audio playback.In digital playback mode, itreceives audio stream form PC via USB interface and transmits audio data according to the AESEBU, IEC60958, SPDIF cnsumer interface standards. Only R L channel PCM audio in 5.1 channel can be conveyed in digital playback mode.
- In analog playback mode, it supports 6 channels codec for analog playback In digital recording mode, it receives SPDIF digital audio input and sends back to PC through USB. Three sampling rates, includes 32KHz,44.1KHz are automatically locked internally. In analog recording mode, fixed 48KHz sampling rate issupportedby analog audio recording.
- If you want the fiber output to support 5.1-channel output, you must have the following conditions:1.The sound source must be DTS 5.1 channels, such as 3D games, HD movies. If it is a general MP3 or general 2-channel video, you can only have 2-channel effect.
- The player settings are important: if it is set up with PowerDVD software from the fiber output "Passthrough" through. Meaning that the sound card is only responsible for the fiber signal output, not decoding. Dispensers strongly recommend KMP this player, the function is very powerful。3. After the fiber output must be AC3 / DTS decoder, or built-in AC3 / DTS decoder amplifier and the like.
![Sabrent Aluminum USB External Stereo Sound Adapter for Windows and Mac. Plug and Play No Drivers Needed. [Silver] (AU-EMAC)](https://m.media-amazon.com/images/I/31TifddZ4xL._SL75_.jpg)
