Alvin's Cables
As a professional connector and cable manufacturer, we produce and sell cost-effective connectors as well as cables. Hope our products can satisfy your demand.
Moreover, it is allowed to customize the cables according to your requirements. Please kindly contact us, tell me what you want, and we would spare no effort to meet your need.
What's more, we can give you a discount if you order big quantity connectors and cables. If you are interested in them, please contact us, thank you!
- Every cable was tested to ensure that there are no short circuit ,no potential breakdown problems before shipping, and it works great!
- For Canon 5D4 5DSR 5D2 5D3 6D 60D 7D 7D2 70D 80D. Please note, it can't be used for Blackmagic camera, please don't use it for the others that we do not mention. This is dummy battery cable, not LP E6 real lithium battery , the appearance is different from the LP E6 real lithium battery, we could call it DR E6 dummy battery too, but it will work for the device we mentioned above (About the detail, welcome to contact us)
- Cable length：Min length 12 inches, Max length 36 inches.
- Please ensure that the output of the power source does not exceed 16.8V.The Output is about 8V. Please Note , this is the correct installation steps, it is good for your device and dummy battery cable: Firstly plug the D-Tap into the battery, then load the dummy battery into the battery compartment, and finally turn on your device.
- Plug A: LP E6 Dummy Battery (DR E6); Plug B: D-tap.
- Every cable was tested to ensure that there are no short circuit ,no potential breakdown problems before shipping, and it works great!
- For Canon 5D4 5DSR 5D2 5D3 6D 60D 7D 7D2 70D 80D. Please note, it can't be used for Blackmagic camera, please don't use it for the others that we do not mention. This is dummy battery cable, not LP E6 real lithium battery , the appearance is different from the LP E6 real lithium battery, we could call it DR E6 dummy battery too, but it will work for the device we mentioned above (About the detail, welcome to contact us)
- Cable length：Min length 12 inches, Max length 36 inches.
- Please ensure that the output of the power source does not exceed 16.8V.The Output is about 8V. Please Note , this is the correct installation steps, it is good for your device and dummy battery cable: Firstly plug the D-Tap into the battery, then load the dummy battery into the battery compartment, and finally turn on your device.
- Plug A: LP E6 Dummy Battery (DR E6); Plug B: D-tap.
