FEATURE:
Adjustable water flow rate
Suction cup mounting feet for either vertical or horizontal mounting
Contains no seals or messy oils, safe for your pets
Good for both fresh water and salt water
SPECIFICATION:
Max Flow Rate: 160 GPH (600L/H)
H-Max (Lift height): 3.6 feet
Voltage: 110 - 120 V @ 60 Hz
Length of power cord: 4 feet
Outlet: Fits 1/2"or 5/16"ID (inside diameter) tubing
DIMENSION:
2 .50" x 1.75" x 2" (L x W x H)
INCLUDES:
(1) Pump
(2) Outlet adapters
Note:
1. Prohibit no-load running. Put the pump into water first before connecting power supply and ensure the pump must be completely submersed under water. It would shorten its lifespan and lead to making loud noises when running in the air for long time.
2. Please clean it regularly in case of debris blockage, the pump would make noises if blocked by debris.
3. The maximum flow rate is 160 GPH, there might be a plus-minus tolerance. Every additional foot of pipe, valve and turn will reduce the flow rate a little bit. If the water sprays out the container, the flow rate would also less than160GPH
There are so many options, why Choose Us
All Our Products are Produced under Strict Quality Inspection. Life-time Technical Support Professional After-Sales Team to Make Things Right within 24hrs.
- Adjustable flow rate: With a control knob, the maximal flow rate can be up to 160GPH(600L/H); Recommanded H-Max (Lift height): 2ft. Note: 160GPH is the theoretical flow rate at zero lift; the actual output decreases with pipe resistance, lifting height. And the higher the lifting height is, the lower the flow rate will be. For example, the flow rate is 160 GPH at 0 ft (without any water pipe), 90 GPH at 2 ft, and nearly 0 GPH at 3.6 ft. And the pump operates on the principle that higher lift results in lower flow rate.
- Optional 2 outlets: Fits 5/16"or 1/2"ID (inside diameter) tubing
- Dimension: 2.50" x 1.75" x 2" (L x W x H), mini size, easy to hide or disguise; Length of power cord: 6 feet
- Wide application: Perfect for water fountains, pet fountain, aquariums, table fountains, waterfalls, hydroponic systems, irrigation systems and for use in any other water features.
- Why is my pump not working properly? To ensure the water pump operates properly, the following steps must be taken: Submersion Requirement: The pump must be fully submerged in water. Debris Clearance: If the impeller is jammed by debris (e.g., fish waste, algae, gravel), causing the pump to stop working, disassemble the housing to remove obstructions and check pipe connections for kinks or blockages to resume normal operation. Air Removal: For the first startup or after water replacement, gently shake the pump to expel any trapped air inside; air trapped in the pipe or the pump may cause "gurgling" noises and the pump failure due to airlock.
- Package Includes: 1x 160 GPH Fountain Pump, 2x Outlet Adapters
- Adjustable flow rate: With a control knob, the maximal flow rate can be up to 160GPH(600L/H); Recommanded H-Max (Lift height): 2ft. Note: 160GPH is the theoretical flow rate at zero lift; the actual output decreases with pipe resistance, lifting height. And the higher the lifting height is, the lower the flow rate will be. For example, the flow rate is 160 GPH at 0 ft (without any water pipe), 90 GPH at 2 ft, and nearly 0 GPH at 3.6 ft. And the pump operates on the principle that higher lift results in lower flow rate.
- Optional 2 outlets: Fits 5/16"or 1/2"ID (inside diameter) tubing
- Dimension: 2.50" x 1.75" x 2" (L x W x H), mini size, easy to hide or disguise; Length of power cord: 6 feet
- Wide application: Perfect for water fountains, pet fountain, aquariums, table fountains, waterfalls, hydroponic systems, irrigation systems and for use in any other water features.
- Why is my pump not working properly? To ensure the water pump operates properly, the following steps must be taken: Submersion Requirement: The pump must be fully submerged in water. Debris Clearance: If the impeller is jammed by debris (e.g., fish waste, algae, gravel), causing the pump to stop working, disassemble the housing to remove obstructions and check pipe connections for kinks or blockages to resume normal operation. Air Removal: For the first startup or after water replacement, gently shake the pump to expel any trapped air inside; air trapped in the pipe or the pump may cause "gurgling" noises and the pump failure due to airlock.
- Package Includes: 1x 160 GPH Fountain Pump, 2x Outlet Adapters
