Simwool Rigidizer - Coating for Ceramic Fiber Blanket - 1 Quart
- With Stand Temperature:2300° Fahrenheit
- Normal Curing Time:24 Hours (Post application). Curing can be accelerated at high temperature.
- Shelf Life:6 Months from the date of opening the sealed cap, if immediately restored in the air tight container.
Rigidizer for rigidizing ceramic fiber a.k.a. Ceramic Fiber Hardener, Ceramic Fiber Binding Agent, Ceramic Fiber Anti-Choking Agent, Ceramic Fiber Air Setting Agent, Hardening Agent, is used for increasing the surface hardness of any flexible thermal insulation or refractory product like ceramic fiber blanket. It can be easily applied by spraying, rolling, dipping, or brushing.
It is a Refractory Coating for Ceramic Fiber used for increasing the surface hardness of any flexible thermal insulation or refractory product like ceramic fiber blanket. It can be easily applied by spraying, rolling, dipping, or brushing.
- High Thermal Insulation: This coating increases the insulation value of ceramic fiber materials and can with stand temperature up to 2300F
- Hard Surface Finish: Rigidizer makes the surface finish after application with increase resistance to mechanical abrasion and helps flexible ceramic fiber material from being too flaky
- Erosion Resistance: Rigidizer increases surface erosion resistance for surfaces exposed to high velocity gases
- Easy to Apply: Because of it low viscosity its application on ceramic fiber materials becomes very simple. It can be applied with brushing, spraying or dipping, It takes around 24 hours for curing post application (Don't keep the lid open when not in use for better preservation as it starts freezing when it comes in contact with air)
- Wide Application: This rigidizer is extensivly used in varied fields for surface coating of ceramic fiber insulation used in forges, foundry, furnace, stove, oven, raku, kiln and many more
- High Thermal Insulation: This coating increases the insulation value of ceramic fiber materials and can with stand temperature up to 2300F
- Hard Surface Finish: Rigidizer makes the surface finish after application with increase resistance to mechanical abrasion and helps flexible ceramic fiber material from being too flaky
- Erosion Resistance: Rigidizer increases surface erosion resistance for surfaces exposed to high velocity gases
- Easy to Apply: Because of it low viscosity its application on ceramic fiber materials becomes very simple. It can be applied with brushing, spraying or dipping, It takes around 24 hours for curing post application (Don't keep the lid open when not in use for better preservation as it starts freezing when it comes in contact with air)
- Wide Application: This rigidizer is extensivly used in varied fields for surface coating of ceramic fiber insulation used in forges, foundry, furnace, stove, oven, raku, kiln and many more
