Before Using: You need prepare 2pcs 1.5V AAA battery.
How to code:
1.Put 2pcs 1.5V AA battery into the remote controller.
2.Select heating mode or cooling mode by pressing the ON/OFF.
3.℃/℉ can be switchable by press and hold the ON & OFF.
4.Plug in the termostat and red LED indicator start to flash.
5.Auto code sucessfully when red LED stop blink.
6.Set up target temp at your needs.
Notice: When you need to replace the mode need to reinstall the battery again.
Features:
A.LCD display with green backlight.
B.Plug and play type, no need installation.
C.Portable design, hold in hand/ stand on table/wall mounted.
D.No need to program, easy operation.
E.Automatic learn code.
F.High/low temperature alarm.
G.Display the current temperature and target temperature.
H.RF 433Mhz RF technology.
I.Free to choose between ℃/℉.
J.Free to choose Auto Operation or Always ON/OFF function (Remote control).
K.Always ON: the connected heater will be always heating.
L.Always OFF: the connected heater will be always OFF.
M.Power outage will not affect the settings.
N.Low battery warning, ℃/℉ symbol will be flashing when the battery is lower than 2.7V.
O.Remote control is powered by 2pcd 1.5V AAA battery.(not included)
Specification:
Maximum ranting: 110V/15A/60Hz, 1800W Max.
Current temp.range: 0℃~60℃ or 32℉~140℉.
Target temp.range: 0℃~60℃ or 32℉~140℉.
Temperature resolution: ±1℃ or ±1℉.
Each press of button: ±1℃ or ±1℉.
Transmission frequency: 433.92 Mhz.
Maximum range: 20m in open area.
Thermostat dimension: 98mm*50mm*29mm
Controller dimension: 122mm*42mm*20mm
Thermostat Weight : 117g
Controller Weight : 55g
What you get:
1x Wireless Thermostat
1x Remote Control
1x Use manual