URBEST Inlet Module Plug 5A Fuse Switch Male Power Socket 10A 250V 3 Pin IEC320 C14

What printing experience was brought by Ultra base? Watch the video to find What has been bought to us by Ultra base. How to assemble the Ultra base platform: Ultra base has the same installation holes (209*209mm) as the standard MK2 and MK3 hot bed, and it's compatible with almost all 3D printers with MK2 and MK3 hot bed. Just peel off the blue tape on the backside, and then fit the Ultra base to the hotbed (base). for assembly video Attention: * Suggested bed temperature may vary depends on the filament material; * Please properly level the bed before printing; * Never let the nozzle rub against the Ultra base directly; * Clean the platform surface with alcohol/water. Temperature settings for different filaments: 1. PLA:50-70â„ƒ 2. Flexible filament: 50-70â„ƒ 3. ABS:100-125â„ƒ ( 110â„ƒ is recommended ) 4. PC:100-130â„ƒ ( 120â„ƒ is recommended ) 5. Nelon:90-120â„ƒ ( 110â„ƒ is recommended ) 6. PP:100-130â„ƒ ( 120â„ƒ is recommended ) 7. PETG: 50-70â„ƒ Ultra base Specification: 1. Material : Special Glass + microporous coatings + Heat bed 2. Item size : 220*220*5.5mm 3. N.W :750g 4. G.W :870g 5. Box size : 26.5cm*26.5cm*5.5cm Heat bed Specification: (1)Material: Aluminum base (2)Voltage: 12V/24V (3)Max Temperature:120 Degree Celsius (4)Dimensions:220mmx220mm (5)Thickness: heat bed 1.5mm (6)Resistance around 0.9 ohm for 12V (7)Resistance around 3.6 ohm for 24V (8)100 Degree Celsius suggested for both 12V and 24V Package List: 1x ANYCUBIC Ultra base 3D Printer Platform with Ultra base heat bed 4* M3X35 Screws 4*M3 nuts 4* spacers.

Excellent Adhesion: Covered by microporous coating, shows strong adhesion in printing. Carbon-silicone construction makes models to be popped off easily after the bed cools down.
Customized Design: Compared to any other heated beds in the market, our small Anycubic logo is located on the bottom right corner, never worry about leaving logos on your prints.
Free Clamps: In order to fix all four corners, Anycubic glass bed features with 4 clamps to prevent separation for your long term use. （And the current version of the hot bed has eliminated the back adhesive, please use the clamp to fix it）
Easy Cleaning: Just gently wipe the surface of the bed with alcohol-soak or acetone by cloth/tissue. Note: Do not clean while its warm, it wont work well.
Durable and Compatible: Made from special inorganic coating, hardness 8 Mohs and heat resistance up to 400 ℃. Compatible with all the cartesian style 3D printer with a Mk3 heated bed.
Excellent Adhesion: Covered by microporous coating, shows strong adhesion in printing. Carbon-silicone construction makes models to be popped off easily after the bed cools down.
Customized Design: Compared to any other heated beds in the market, our small Anycubic logo is located on the bottom right corner, never worry about leaving logos on your prints.
Free Clamps: In order to fix all four corners, Anycubic glass bed features with 4 clamps to prevent separation for your long term use. （And the current version of the hot bed has eliminated the back adhesive, please use the clamp to fix it）
Easy Cleaning: Just gently wipe the surface of the bed with alcohol-soak or acetone by cloth/tissue. Note: Do not clean while its warm, it wont work well.
Durable and Compatible: Made from special inorganic coating, hardness 8 Mohs and heat resistance up to 400 ℃. Compatible with all the cartesian style 3D printer with a Mk3 heated bed.

Top WaffleMaker Reviews

Anycubic Ultrabase Platform for 3D Printer (240x220+ Hotbed);