Li ion Li Polymer Battery Pack Board for 13S 48V/54.6V Batteries;
Li ion Li Polymer Battery Pack Board for 13S 48V/54.6V Batteries

This product is a battery protection board with with 14-pin cable. Its rated discharging current is 15A and current consumption is less than 30uA. It is designed for 13 series Li-ion batteries. And you can use it for ternary...

Buy Now From Amazon

This product is a battery protection board with with 14-pin cable. Its rated discharging current is 15A and current consumption is less than 30uA. It is designed for 13 series Li-ion batteries. And you can use it for ternary batteries, manganese acid batteries and cobalt acid batteries. Besides, the board is equipped with high voltage withstanding and low conduction resistance function, so you can use this battery protection board to meet your general using purposes.

Specifications:
Overcharge Protection
Single Battery Overcharge Detection Voltage : 4.25V±0.05V
Single Battery Overcharge Release Voltage : 4.10V±0.05V
Charge Protection
Rated Charging Current: ≤5A
Over-discharge Protection
Single Battery Overcharge Detection Voltage: 2.50V±0.05V
Single Battery Overcharge Release Voltage: 3.00V±0.05V
Rated discharging Current: 15A
Discharging Protection Current:45±5A
Short Circuit Protection: Disconnecting Load
Inner Resistance: ≤25mΩ
Current Consumption: ≤30uA
Size: 60×34×10mm / 2.36×1.33×0.39"

Package Includes:
1×13S Lithium Battery Protection Board

  • Features: High voltage , low conductivity, powerful and professional
  • Easy to use: The charging connector and the discharge connector are separated, easy to use
  • Application: Designed for 13-cell lithium batteries, can be used for ternary batteries, manganese batteries, cobalt batteries
  • functions: overcharge , over-discharge , over-current , short-circuit and other multiple functions
  • Parameters: Charging 5A, discharging 15A, can be used for electric with motor power less than 500W
  • Features: High voltage , low conductivity, powerful and professional
  • Easy to use: The charging connector and the discharge connector are separated, easy to use
  • Application: Designed for 13-cell lithium batteries, can be used for ternary batteries, manganese batteries, cobalt batteries
  • functions: overcharge , over-discharge , over-current , short-circuit and other multiple functions
  • Parameters: Charging 5A, discharging 15A, can be used for electric with motor power less than 500W

Similar Products

Breynet 3M 0.1 x 8 mm 18650 Pure Ni Plate Nickel Welding Strip Tape 3 M For 18650 Battery Spot Welder/WeldingDIY Battery Pack PVC Heat Shrink Wrap Tube Length 3M Width 250±5MM for Big Battery Pack PowerDIY Battery Pack PVC Heat Shrink Wrap Tube 180±3MM Width 3M Length for Big Battery Pack Power（If You are not Sure What Size You Need,Pls Email to me When u Place The Order)Akozon Protection Board, Li-Ion Li-Polymer Battery Pack Protection Board BMS for 13S 48V/54.6V BatteriesZRM&E 1 Roll 18650 Lithium Battery Pack Nickel Strip 20.25mm Spacing 2 Parallel Batteries Spot Welding Nickel BeltDIY Battery Pack PVC Heat Shrink Wrap Tube,Length 3M Flat Width 150±1MM for Big Battery Pack Power54.6V 2A Electric Vehicle Lithium Battery Charger for Convenient Health Care Motorcycles Ebike Electric Lithium Batteries 48V DC 5.5 x 2.1mm PlugBaimeixun 20pcs 4x5 Cell Spacer 18650 Lithium Battery Plastic Holder Bracket