40pcs iPhone Cable Tube to Protect and Extend Life of Cord Decorate Repair Fix Broken Busted Charger Syncing Data Wire for iPhone X 8 7 6 Plus 5 SE iPad iPod Apple MFI Certified Lightning to USB Cable;

Kindly Notes:

1. Suit for iPhone cable ONLY.
2. Please make sure the cable head circumference ≤ 20mm.
3. For best results, please use a heat gun until it reduces in size. (The Heat Gun is Not Included).
4. No matter how you bend, compressed, wrinkles, scratch the tubing,
it will not affect the using results, the tubing will becoming new after heated.

How to Use?

1. Choose the cable which want to be DIY fixed or repaired.
2. Make sure the cable head circumference ≤ 22mm.
3. Clean the cable (not included) before you start.
4. Put the cable get through the tubing.
6. Prepare and use a heat gun (The heat gun is not included).
7. For best results, control the heat gun shrink temp between: 70°C - 125°C.
8. Heating until it reduces in size totally and finished (Shrinkage Ratio: 2:1).
9. Be careful with heat temperature, please cool it a few minutes later before touch the finished cable.
10. Please feel free to contact us if you need any further assistance during the installation.

Specifications:

Quantity: 40 pcs
Total Length: 2.4'' (6cm)

Material: Polyolefin
Supplied Internal Diameter: 6mm
Fully Shrunk Internal Diameter: 3mm
Shrinkage Ratio: 2:1 (Will maximum shrink to 1 / 2 of its supplied diameter)
Minimum Shrinkage Temp: +70°C
Full Shrinkage Temp: +110°C Maximum
Operating Temperature: -45°C to + 125°C
Tensile Strength: 10.4Mpa
Dielectric Strength: 15 kV / mm
Flammability: Flame Retardant
Cutting Method: Scissors or Sharp Knife

Package Included:

40pcs x Short 2.4'' Tubing for iPhone Cable (The Reference Objects Heat Gun and Cables are Not Included)