42V Charger for 36 V Lithium Battery Charger Output 2A Input 100-240 VAC 36V 10S Battery Pack (XLR 3-Pin);

Features

Short Circuit Protection. Be safe to use.

Output :42V 2A

Input: AC100-240V

Input Voltage:

Nominal Voltage:100-240Vac

Variation Range:90-264Vac

Nominal Frequency:50/60Hz

Variation Frequency:47-63Hz

Charging Plug Type: XLR

The power charger size :L132*W56*H32mm

Note: 36V is battery voltage and 42V is the charger voltage.

Package Include:1 x 42V Battery Charger

1 x Power Cord

Tangspower has always devoted itself to providing products with excellent quality for the end-users
Use and maintenance of the charger :
1. When charging, first connector to the battery, then connect to AC; after full, cut off AC,
then pull the battery plug. If you pull the battery plug first while charging, especially when
the charging current is large (red light), it is very easy to damage the charger.
2. LED display after turning green, then charge for 2-3 hours.
3. Please do not run out of battery power, then charger. Otherwise the battery cannot be
protected or even damaged.
4. long-term shallow discharge battery, about 3 months, for a deep discharge, is the so-
called re-lighting, which is conducive to the activation of long-term immobile material in
the deep part of the battery. Luminous means that riding the controller battery
undervoltage protection action
5. If your battery has not been used for a long time (2-3 months), please charge the battery before using it. Make sure your battery is not broken.
6.Please use the charger in a dry place in time.
7.When you do not use the charger, do not always connect the power supply.
8.Please confirm your battery, Because it is used to charge the lithium battery. Do not
use the charger on the LiFepo4 battery, otherwise the charger will be got incredibly hot.