Operation Method
1ã€Please put the product upright, rotate the outer cover and remove it. Refer to Fig.1.
2ã€Please connect the AC adapter to the DC jack of the base. Refer to Fig.2.
3ã€Please use the measuring cup to the fill up the water tank.
* Be careful not to exceed 100ML water.
* Do not add water while the device is working and do not use warm or hot water.
4ã€Drop in some essential oil. It is better to use 2 -3 drops(0.1-0.15ml) of essential oil for 100ml water. Refer to Fig.3.
5ã€Install the covers back on and rotate it clockwise until the cover and the base are tightly fastened. Refer to Fig.4.
* Important notes: Please cover the outer cover before switch on.
6ã€Please connect the AC adapter with family user power supply socket. When power on, the aroma diffuser beeps once. At this time, aroma diffuser is in the standby state.
7ã€If you don't use it for a long time, please pour all the water out and store it in a dry place.
Function Instructions
1ã€Left key is LIGHT button.
aã€Press the "LIGHT" button once to turn on the light, and the product beeps, and light cycles automatically. During light cycle, press the key to set preferred color.
bã€In any time press the "LIGHT" button for three seconds, the light goes out. Refer to Fig.5.
2ã€Right key is MIST button.
aã€The first press of "MIST" button in short time, the product beeps and aroma diffuser work as the interval mist mode (work 30 seconds, stop 30 seconds).
bã€When press the "MIST" button again, the product beeps once, and aroma diffuser run as continuous work mode.
cã€Press the "MIST" once again in short time, aroma diffuser is off. Refer to Fig.6.
3ã€If water tank is lack of water, the diffuser will shut off automatically.
*Note: When press the function key, the diffuser will beep once to indicate that your operation is finised.