Digital-Multimeter Manual-Ranging Tester Measuring AC/DC voltage AC/DC current resistance and LCD Backlight;

2000 Counts Manual-Ranging Multimeter Tester with Diodes Buzzer ON/OFF,Square wave output,Date Hold,Measuring AC DC voltage,AC DC current,resistance and LCD Backlight
When Digital Multimeter Specification:
DCV: 200mV,Over load is 250V,2V 20V 200V(±0.5%+2) and 500V(±0.8%+2) Over load is 500V

ACV: 200V 500V (±1.2%+10) Overload is 500V
DCA:200uA (±1%+2),2mA 20mA (±1%+2),200mA(±1.2%+2),10 A(±2%+5),Max
Current is 10A within 10'S,Overload is 200mA/250V
Resistance:200Ω(±8%+5),2KΩ 20kΩ 200kΩ(±8%+2),20MΩ(±1%+5),200MΩ(±5%+20)
Square wave output:50 HZ,,Output 47KΩ,Overload is 10V
Diodes Buzzer ON/OFF



Packge:
1×Digital Multimeter
1×9V batterie
1×Test Leads
1×Alligator Clips
1×User Manual
1×Plastic Box


The grip of the multimeter is around the edge of the entire multimeter and a kickstand on the back so you don't have to be holding the entire time when you want to use it.
It can also be used to diagnose, assemble, and repair circuitry and wiring. Other features include a low battery indicator, continuity buzzer, and overload protection.


The Hold Button can be useful when it's for more precise measurements.
For example if measuring a sensor you might want to make a note that the meter reads 2.984 V
and it's more convenient than trying to remember the value while you write it down on a piece of paper or enter the value into a spreadsheet etc