Give a fan to your raspberry pi. You will find the master chip getting so hot when you run the raspberry pi for a long time. Especially in the hot summer, the temperature of the raspberry pi master chip will be higher, up to 85 degrees Celsius, then the chip will underclocking automatically. You need a suitable cooling fan to alleviate this problem. If you watch the video on the device, play games, etc., then you need the cooling fan and heat sink kit to keep it cool.
CQRobot launch this dual fan cooling fan for you, there is conductive silicone grease viscose on the back, so it can be easily affixed to the components. With ultra-thin copper heat sink, attached to the back of the DDR, the cooling effect will be better. By the test of CQRobot, by using the kit, the temperature of your raspberry pi motherboard can be reduced by up to 20 degrees Celsius.
SPECIFICATION
Cooling Fan and Thermal Tape (Thin Tape+Thick Tape)
- Voltage: 5V
- Current: 0.3A
- Power: 1.5W
- Speed: 7500rpm
- Noise: 37DBA
- Net weight: 40g
- Size: 25mm * 56mm * 15mm
Copper Heat Sink
- Material: Pure Copper
- Size: 12mm * 12mm * 1mm
SHIPPING LIST
1 * Ultimate Cooling Fan
1 * Pure Copper Heat Sink
1 * Thermal Tape (Thin Tape+Thick Tape)
