Complete your jockey box purchase with our Coldbreak dispensing kits. It includes everything you need (except a CO2 tank) to start pouring. The American Sankey (D) couplers will fit any American keg.
- The Coldbreak 2 tap dispensing kit, SSDK2, comes with everything you need to hook your kegs up to a 2 tap jockey box, except CO2.
- It is compatible with any Coldbreak brand jockey box.
- The regulator is a high quality Taprite co₂ regulator with dual gauges (fill gauge and 0-60 PSI pressure gauge). The regulator has a 5/16” barb to connect with your blue air tubing and has a built in shut off valve. The regulator will connect to any CO2 tank with a CGA-320 valve, which is standard in the USA.
- The blue air lines are 4' length x 5/16” diameter. 3 are supplied. One line to connect the regulator to the manifold, and two lines to connect the manifold outputs to each beer coupler.
- The clear beverage jumpers connect to the top of the beer coupler and to your jockey box. They carry liquid from your keg to your Jockey Box. They are 6' length x 5/16" with stainless steel tailpieces. One tailpiece is straight and the other is bent 90 degrees. We usually connect the 90 degree end to the Jockey Box, but either end will fit the Jockey Box or the beer coupler.
- The American Sankey (D) beer couplers with stainless steel probe will fit all USA brand kegs. This includes craft beer and most macro (large) beer manufacturers. Each beer coupler will come with extra tailpieces, so you may wind up with several extra.
- A CO2 Tank is NOT included (but required). We recommend finding a supplier locally, as it's against Federal regulation to ship full tanks.
- Hose clamps and rubber washers are included.
- The Coldbreak 2 tap dispensing kit, SSDK2, comes with everything you need to hook your kegs up to a 2 tap jockey box, except CO2.
- It is compatible with any Coldbreak brand jockey box.
- The regulator is a high quality Taprite co₂ regulator with dual gauges (fill gauge and 0-60 PSI pressure gauge). The regulator has a 5/16” barb to connect with your blue air tubing and has a built in shut off valve. The regulator will connect to any CO2 tank with a CGA-320 valve, which is standard in the USA.
- The blue air lines are 4' length x 5/16” diameter. 3 are supplied. One line to connect the regulator to the manifold, and two lines to connect the manifold outputs to each beer coupler.
- The clear beverage jumpers connect to the top of the beer coupler and to your jockey box. They carry liquid from your keg to your Jockey Box. They are 6' length x 5/16" with stainless steel tailpieces. One tailpiece is straight and the other is bent 90 degrees. We usually connect the 90 degree end to the Jockey Box, but either end will fit the Jockey Box or the beer coupler.
- The American Sankey (D) beer couplers with stainless steel probe will fit all USA brand kegs. This includes craft beer and most macro (large) beer manufacturers. Each beer coupler will come with extra tailpieces, so you may wind up with several extra.
- A CO2 Tank is NOT included (but required). We recommend finding a supplier locally, as it's against Federal regulation to ship full tanks.
- Hose clamps and rubber washers are included.
