5 Gallon Copper Moonshine Whiskey & Brandy Still with Worm & Thumper by North Georgia Still Company. 1/2" OD from still to thumper. 3/8" OD from thumper to worm.
- Search "North Georgia Still Company" to find all our products available on Amazon. Our massive vapor cones allow excellent head space. Our caps and collars are made in pairs, the cap designed with a slight taper, to "pinch" down on the collar. Each one hand fitted, to aid in a tight seal. Our bottoms are designed to hold the weight of your wash. With double thick bottom seams, our stills can support over double the weight you will load them with.
- Our worm condenser comes standard with water inlets and outlets to cycle cold water in the can, which allows your shine to cool down more efficiently. It has 7 foot of copper tubing coiled in the can to ensure your vapors have maximum time to condense back into a cool liquid. It is designed to be used with a hose or a water pump.
- The thumper's inlet runs all the way to the bottom. It is then cut at a 45-degree angle, with flutes cut into it to maximize effectiveness. The outlet barely protrudes into the top of the thump keg, allowing the vapors to escape with ease, keeping pressure to a minimum. All tubing is deburred and chamfered to allow your fittings to connect without hassle.
- Purchase our complete assembly kit on Amazon: North Georgia Still Company Assembly Kit- 1/2 OD to 3/8 OD
- Check out our site for additional resources on fermentation & distillation, our FAQ page, recipes, and more. All our equipment comes with step by step instructions and starter recipes
- Search "North Georgia Still Company" to find all our products available on Amazon. Our massive vapor cones allow excellent head space. Our caps and collars are made in pairs, the cap designed with a slight taper, to "pinch" down on the collar. Each one hand fitted, to aid in a tight seal. Our bottoms are designed to hold the weight of your wash. With double thick bottom seams, our stills can support over double the weight you will load them with.
- Our worm condenser comes standard with water inlets and outlets to cycle cold water in the can, which allows your shine to cool down more efficiently. It has 7 foot of copper tubing coiled in the can to ensure your vapors have maximum time to condense back into a cool liquid. It is designed to be used with a hose or a water pump.
- The thumper's inlet runs all the way to the bottom. It is then cut at a 45-degree angle, with flutes cut into it to maximize effectiveness. The outlet barely protrudes into the top of the thump keg, allowing the vapors to escape with ease, keeping pressure to a minimum. All tubing is deburred and chamfered to allow your fittings to connect without hassle.
- Purchase our complete assembly kit on Amazon: North Georgia Still Company Assembly Kit- 1/2 OD to 3/8 OD
- Check out our site for additional resources on fermentation & distillation, our FAQ page, recipes, and more. All our equipment comes with step by step instructions and starter recipes
