Features
Material: Plastic
Total length: 13.75 inches (+/- 10mm)
The distance between the ends: 12 inches (+/- 10mm)
IMPORTANT NOTE: 4 pins spacing on this connector is approx. 3-4mm apart from each other. Which is typical fitting measure on most strip size noted 5050/3528 RGB SMD LED color strip with 8mm & 10mm PCB sized (this will not fit 12mm sized PCB), but to avoid fitting issue, please double check your strip's inner wiring spacing prior to ordering to ensure it meet noted spacing to work with the pins within the connector. The housing of the adapter's port can fit up to 14mm (width) x 7.5mm (height) strip.
Package includes
2 x extention cables
4 x pins
- 【4 PIN EXTENTION CABLE】This 4 Pins Extention/Jumper/Bridge cable, as the name suggests, it’s a bridge to connect two independently RGB LED strip Lights together to make them into endless possibilities, no matter shapes or angles.
- 【THE MOST IMPORTANT】Only designed for 110V/120V high voltage 5050, 3528 SMD RGB Flat LED Strip Rope Lighting. Please pay attention that it is not design to be used on 12V/24V series LED Strip.
- 【KINDS OF APPLICAITONS】Great to use for corner turns, bridge between spaces, void between window boxes or railing. Especially use between controller/transmission box and when you want to make your lights into 90 degree angle, please do not forget to use this cable.
- 【THE BASIC IMFORMATION】The total length of this extention cable is about 13.75 inches (+/- 10mm), the distance between the ends is about 12 inches (+/- 10mm). Adapter fitting of LED strip light up to size (7.5mm x 14mm).
- 【RISK FREE PURCHASING】12 months warranty and 24 hours customer service. Any questions, any uncertainties, any doubt, please feel free to contact us at first, we will try our best to help you solve it. Welcome to buy!
- 【4 PIN EXTENTION CABLE】This 4 Pins Extention/Jumper/Bridge cable, as the name suggests, it’s a bridge to connect two independently RGB LED strip Lights together to make them into endless possibilities, no matter shapes or angles.
- 【THE MOST IMPORTANT】Only designed for 110V/120V high voltage 5050, 3528 SMD RGB Flat LED Strip Rope Lighting. Please pay attention that it is not design to be used on 12V/24V series LED Strip.
- 【KINDS OF APPLICAITONS】Great to use for corner turns, bridge between spaces, void between window boxes or railing. Especially use between controller/transmission box and when you want to make your lights into 90 degree angle, please do not forget to use this cable.
- 【THE BASIC IMFORMATION】The total length of this extention cable is about 13.75 inches (+/- 10mm), the distance between the ends is about 12 inches (+/- 10mm). Adapter fitting of LED strip light up to size (7.5mm x 14mm).
- 【RISK FREE PURCHASING】12 months warranty and 24 hours customer service. Any questions, any uncertainties, any doubt, please feel free to contact us at first, we will try our best to help you solve it. Welcome to buy!
