Canying Car Trunk Handle Rear View Camera Special for Ford Mondeo Fiesta S-Max Focus 2C 3C Land Rover Freelander Range Rover;

Note: For after installed medias or screens with RCA video input only, it is NOT for orignal Car media directly!You can add camera interface or adapter cable if want to use it with original media.

Applicable to Cars:
for Land Rover Freelander 2 Range Rover
for Land Rover Range Rover
for Ford Mondeo Fiesta S-Max 2011 2012
for Ford Focus 2C 3C 2011
(We have size picture but please allow 0.5-1 inch difference due to manual measurement.Please check and make sure the item is the one you need)

Technical parameters
Images sensors CMOS: (PC7070)
Power Supply: DC12V
Current Consumption: 100mA(MAX)
Power: 1.2W(MAX)
Effective pixels: 648*488
Electronic shutter: 1/60(NTSC)1/SD(PAL) 1/10,000 second
Minimum illumination: 0.5Lux
S/N Ratio: ≥48dB
Resolution(TV Lines): 580 TV
System: PAL/NTSC
Lens Angle(Deg): 170°
Video output: 1.0vp-p,75ohm
IP rating: IP67/68
White Balance: Auto
AGC: Auto
BLC Auto

The product is easy installation and assembly, but Note:
1.This product is a 12V voltage.
2.When installing the product,be sure to use the specified drill,screws,etc. to avoid damage to the camera function
Important: it is not LVDS connectors output to original screen. So the camera don't fit car original screen.

Unique Design:This backup camera is with Guide Line (Yes/No) Switcher. It is with Guide line as default.
Remember to turn off the power before switching
1.If you need a backup camera with distance scale line,you just install it without any operation.
2.If you need a backup camera without distance scale line,please cut the white wire.