RSTH LCD Screen Display Touch Digitizer Frame Assembly Set for iPhone 7 4.7 inch with 3D Touch and Repair Kits（Black） …;

Compatible with : iPhone 7 4.7 inch LCD
Color : Black

[Tools Package List]
1* Rose Red Screwdriver(Plum screwdriver and cross point driver for different uses)
1*Tempered glass screen protectoer
1*Sucker pad
1*Niddle (For retriving card)
1*Cleaning cloth
2*Plastic crowbar
2*Plastic pry plate
*Please Be Note: We provide preassembled replacement LCD Digitizer without home button earpiece,front camera flex and Metal Plate*

If you have a cracked glass, broken LCD, partial image or issues with your Touch Screen sensitivity then this iPhone 7 Touch Screen digitizer is exactly what you need.

[Instruction ]
If you are experiencing any installation issues, please follow any of these steps:
1. Please check the iPhone 7 LCD to make sure the flex cable is in good condition and there is no debris on the connector.
2. Disconnect and reconnect the cable from the motherboard side.
3. Then Reboot: Hold buttons (Home, Up volume, and Power button) untill the phone switch down and then switch up again.
4. Make sure your iPhone 7 IOS is upgraded to the latest version.
5. Leave the phone alone for a bit in a dry environment. Sometimes there is static after install that will go away after some time. Please leave phone alone overnight and see if this problem persists in the morning.

[Very Important]
It is highly suggested that all items must be tested before fully installing. Any item found to have been fully installed and broken during the installation process is not returnable or replaceable. Inspect the item closely before installing. We are recommend that if you have not repaired a wireless device in the past that you consult a professional before purchasing.