HTRC B3 balance charger, used for lipo battery, it's easy to use, just one step to charge. Built in balance port, balance charging, charges battery better and faster, maximizes battery life and performance.
Specification
Input voltage: AC 110-240V
Balance charge current: 800mA
Max.Output Current: 3*800mA
Cells for lipo: 2s-3s
Display: Green & Red LED
Item size: 3.5 * 2.1 * 1.2inch
Item Weight: 0.18lb
What in box:
1 x HTRC B3 AC Compact Charger
1 x AC Cord (US)
1 x Manual
- AC DC dual input, AC: 100-240V; DC: 11-18V. High power and high performance circuit - maximum output power 150W. Charge current: 0.1-10A; Discharge current: 0.1-2A; Max discharge power: 10W. Built-in cooling fan, it also has power switch and a 5V 2.1A USB output ports.
- It supports 1-6s LiPo LiFe LiHV Li-ion, 1-15s NiCd/NiMH, 2-20V PB and Smart Battery I/II/III. Automatic identification of lithium batteries cells counts. Multiple charging modes: Charge, Balance Charge, Discharge, etc. When the battery is full charged, the battery charger will automatically stop charging. Tips: Please choose the right type of battery when charge. When you charge the battery, please don't use the AC power cable and DC cord at the same time.
- Functions: 1.Battery meter- display lithium battery cell counts, total voltage, battery capacity percentage, and each cell's voltage; 2. Lithium battery internal resistance checking; 3.Battery balancer; 4.Digital DC power; 5.Supports for smart battery.
- This Charger allows user to set the charge/discharge end voltage of the battery. For an example: lipo battery end voltage is 4.2V /cell when charing, while on this charger, the end voltage is adjustable, rangs from 3.85V to 4.3V. Warning: this feature for expert only!
- Low input voltage limit, automatic charge current limit, Delta-peak sensitivity, capacity limit, processing time limit, temperature threshold. Data storage and loading: 20 memory data. Allow firmware to update.
- AC DC dual input, AC: 100-240V; DC: 11-18V. High power and high performance circuit - maximum output power 150W. Charge current: 0.1-10A; Discharge current: 0.1-2A; Max discharge power: 10W. Built-in cooling fan, it also has power switch and a 5V 2.1A USB output ports.
- It supports 1-6s LiPo LiFe LiHV Li-ion, 1-15s NiCd/NiMH, 2-20V PB and Smart Battery I/II/III. Automatic identification of lithium batteries cells counts. Multiple charging modes: Charge, Balance Charge, Discharge, etc. When the battery is full charged, the battery charger will automatically stop charging. Tips: Please choose the right type of battery when charge. When you charge the battery, please don't use the AC power cable and DC cord at the same time.
- Functions: 1.Battery meter- display lithium battery cell counts, total voltage, battery capacity percentage, and each cell's voltage; 2. Lithium battery internal resistance checking; 3.Battery balancer; 4.Digital DC power; 5.Supports for smart battery.
- This Charger allows user to set the charge/discharge end voltage of the battery. For an example: lipo battery end voltage is 4.2V /cell when charing, while on this charger, the end voltage is adjustable, rangs from 3.85V to 4.3V. Warning: this feature for expert only!
- Low input voltage limit, automatic charge current limit, Delta-peak sensitivity, capacity limit, processing time limit, temperature threshold. Data storage and loading: 20 memory data. Allow firmware to update.
