This chrome look solenoid is used with air horns that require an on-board air system for 12 volt vehicles. When the vehicle's horn button is depressed, the solenoid becomes electrically energized, opening its chamber and permitting air from the tank to reach the horn. The solenoid remains engaged as long as the horn button is depressed. Air Valve is rated up to 200 PSI air pressure. Screws in to any horn that has a ¼" NPT female thread, at air port. Includes a 1/8" male thread by ¼" barbed fitting that accommodates a ¼" outer diameter hose with a 1/8" inner diameter connection. Electric Air Valve (Solenoid) Power Source: 12V Chrome plated metal housing Air Output: ¼" OD male thread Air Input Fitting: 1/8" male thread x ¼" Compression Valve max air pressure: 200 PSI Valve Size: 3-¼" x 2"
- 12V FAST RESPONSE SOLENOID - A heavy duty normally closed air valve that will allow the air to enter the horn when it becomes electrically energized. An improved high flow inner core will let the maximum amount of air pass trough the valve from the tank to the horn
- 200 PSI MAXIMUM AIR PRESSURE - Ideal for any train horn installed on any vehicle with a 12 volt power source. The included compression fitting is more efficient holding the air hose at high air pressures compared to barbed or push to connect fittings
- CHROME PLATED METAL HOUSING - The valve is made of metal which has been chrome-plated for an additional layer of protection, tough enough to withstand any weather condition
- EASY TO INSTALL - Screws into any air horn that has a ¼" NPT female thread air port. Includes a 1/8" NPT male thread compression fitting to accommodate a ¼" outer diameter with 1/8" inner diameter air hose. Clear instructions are provided
- PREMIUM QUALITY & BEST VALUE FOR MONEY - This valve was designed to ensure it lasts many years with daily use while increasing your horn's performance to unprecedented levels
- 12V FAST RESPONSE SOLENOID - A heavy duty normally closed air valve that will allow the air to enter the horn when it becomes electrically energized. An improved high flow inner core will let the maximum amount of air pass trough the valve from the tank to the horn
- 200 PSI MAXIMUM AIR PRESSURE - Ideal for any train horn installed on any vehicle with a 12 volt power source. The included compression fitting is more efficient holding the air hose at high air pressures compared to barbed or push to connect fittings
- CHROME PLATED METAL HOUSING - The valve is made of metal which has been chrome-plated for an additional layer of protection, tough enough to withstand any weather condition
- EASY TO INSTALL - Screws into any air horn that has a ¼" NPT female thread air port. Includes a 1/8" NPT male thread compression fitting to accommodate a ¼" outer diameter with 1/8" inner diameter air hose. Clear instructions are provided
- PREMIUM QUALITY & BEST VALUE FOR MONEY - This valve was designed to ensure it lasts many years with daily use while increasing your horn's performance to unprecedented levels
