4pc 1.5" (38mm) Wheel Adapters 5x4.5 to 5x5 Adapters Fits Jeep JK Wheels onto TJ YJ Hubcentricdapters Spacers | fits JK Wheels on TJ YJ KK SJ XJ MJ;

THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES (ADAPTERS DO CHANGE THE BOLT PATTERN)

1984-2001 JEEP CHEROKEE
1993-1998 JEEP GRAND CHEROKEE
2002-2012 JEEP LIBERTY
1987-2006 JEEP WRANGLER


THE WHEELS FROM THE FOLLOWING VEHICLES WILL ONLY BOLT UP TO THE ADAPTER


1980-2001 Jeep Cherokee
1993-1998 Jeep Grand Cherokee
1987-2006 Jeep Wrangler
2002-2012 Jeep Liberty
1986-1992 Jeep Comanche




ADDITIONAL INFORMATION

• Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
• Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
• Installation needs to be performed by a trained professional


It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
1. Your lugs studs will need to be shortened by grinding them down
2. You can replace your studs will shorter studs
3. if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)




ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS




• DESIGNED TO CHANGE THE BOLT PATTERN OF THE VEHICLE
• Vehicle Bolt Pattern: 5x4.5
• Wheel Bolt Pattern: 5x5
• Hub Bore: 71.5mm
• Thickness: Each Spacer Measures 1.5" Thick
• DESIGNED TO CHANGE THE BOLT PATTERN OF THE VEHICLE
• Vehicle Bolt Pattern: 5x4.5
• Wheel Bolt Pattern: 5x5
• Hub Bore: 71.5mm
• Thickness: Each Spacer Measures 1.5" Thick