Digital Coffee Densitometer Quick Guide:
1. Power On: Press key "READ" 1 second only.
Â
2. Scale converting: press key "SCALE" 1second to choose the unit Brix or Concentration.
"S01" is for Brix %, this also can test all liquid with sugar such as juice, milky tea ect, range is 0-30%. "S02" is for coffee concentration, range is 0-25.
Â
3. Measurement: Use suction tube takes some sample from the 1/2 deep of the cup (to avoid the cream or solid of the coffee), drip about 3~5 drops to the sample plate, then cover it.
Press key " READ" 1 second, meter will give the current value, if press key "READ" 2 seconds more, meter will make and countdown 15 times' measurements, the reading is the average value.
Â
Maintenance: Always clean and wash the sample plate with distilled water and dry it with soft cleaning cloth, never use hard things to clean, otherwise it will damage the prism glass.
Â
Spec:
Battery: AAA Alkaline Battery (Not Included)
Package Size: 6.7*4.2*2.0inch (170*105*50mm)
Package Weight: 12.3oz (350g)
- Function: Coffee concentration with range of 0-25%; Brix measurement with range of 0-30%; temperature displayed; calibration function
- Provide with suction tube and spare protective cover. The function keys are clear and easy to operate. Digital screen with large number, battery power can be displayed.
- Temperature unit converting: Press key “SCALE” more than 2 seconds, meter will display Celsius or Fahrenheit.
- Calibration: No need calibration every time. Drip 3~5 drops distilled water in sample plate, make sure the water and meter temperature is same and standard temperature is 20ºC, then cover it. Press key “CAL” more than 2 seconds until “CAL” flashing, press “CAL” key again, meter will display “END” and show 0.0%.
- Power off: Meter will power off within one minute if no any operation.
- Function: Coffee concentration with range of 0-25%; Brix measurement with range of 0-30%; temperature displayed; calibration function
- Provide with suction tube and spare protective cover. The function keys are clear and easy to operate. Digital screen with large number, battery power can be displayed.
- Temperature unit converting: Press key “SCALE” more than 2 seconds, meter will display Celsius or Fahrenheit.
- Calibration: No need calibration every time. Drip 3~5 drops distilled water in sample plate, make sure the water and meter temperature is same and standard temperature is 20ºC, then cover it. Press key “CAL” more than 2 seconds until “CAL” flashing, press “CAL” key again, meter will display “END” and show 0.0%.
- Power off: Meter will power off within one minute if no any operation.
