FRAM FV405 Positive Crankcase Ventilation PCV Valve

Compatible Vehicles:
2010 Chrysler PT Cruiser Classic Wagon 4-Door
2010 Chrysler PT Cruiser Couture Edition Wagon 4-Door
2009/ 2008/ 2007/ 2006/ 2004/ 2003/ 2002/ 2001 Chrysler PT Cruiser Base Wagon 4-Door
2009/ 2008 Chrysler PT Cruiser LX Wagon 4-Door
2009/ 2008/ 2007/ 2006/ 2005/ 2004/ 2003/ 2002/ 2001 Chrysler PT Cruiser Touring Wagon 4-Door
2008/ 2005 Chrysler PT Cruiser Touring Convertible 2-Door Chrysler PT Cruiser Touring Convertible 2-Door
2007/ 2006/ 2005/ 2004/ 2003/ 2002/ 2001 Chrysler PT Cruiser Limited Wagon 4-Door
2007/ 2006/ 2005/ 2004/ 2003/ 2002/ 2001 Dodge Caravan SE Mini Passenger 4-Door
2006/ 2005 Chrysler PT Cruiser Street Cruiser Wagon 4-Door
2006/ 2005/ 2004/ Chrysler Sebring Base Convertible 2-Door
2006/ 2005/ 2004/ Chrysler Sebring Base Sedan 4-Door
2006/ 2005/ 2004/ 2003/ 2002/ 2001 Dodge Stratus SE Sedan 4-Door
2006/ 2005/ 2004/ Dodge Stratus SXT Sedan 4-Door
2005 Chrysler PT Cruiser Dream Cruiser Wagon 4-Door
2005 Chrysler PT Cruiser GT Convertible 2-Door
This is Non-OEM product, accessory only!Replacement procedure. （Take "2005 PT Cruiser 2.4L" as an example）
Step ①: Remove the six 8mm upper manifold retaining bolts.
Step ②:Loosen the air intake clamp at the throttle body.
Step ③:Lift the upper intake manifold and retain out of the way using a bungee cord.
Step ④:Remove old plug wire.
Step ⑤:Using cotton swab, apply a very small amount of dielectric grease to the boot interior at each end (just the boot - not the terminal).
Step ⑥:Reinstall new plug wire.
Step ⑦:Repeat for each cylinder until done.
Step ⑧:Lower intake manifold back in place and tighten to spec from interior bolts to the outside (no new gaskets required).
Step ⑨:Tighten clamp at air intake to throttle body.

Product Name: Ignition Wire; Material: Silicone, Metal; Package Content: 4 x Ignition Wire; Manufacturer Part Number: 671-4079; Wire Diameter: 7mm/ 0.27 inches
Identical in form, fit, color and performance to the factory-installed wire sets.
Ferrite impregnated layers, silicone insulation for superior dielectric and heat performance, and high temperature Class E silicon jacket to withstand chemicals, moisture, and temperatures from -40 degrees Fahrenheit to 428 degrees Fahrenheit.
Pre-cut wire to exact length with reinforcing member for added strength and terminal retention.
Identical OE end caps, carbon impregnated fiberglass core for superior conductivity, fiberglass braid for maximum strength, conductive silicone layer for high temperature performance, and EMI/RFI noise suppression.
Product Name: Ignition Wire; Material: Silicone, Metal; Package Content: 4 x Ignition Wire; Manufacturer Part Number: 671-4079; Wire Diameter: 7mm/ 0.27 inches
Identical in form, fit, color and performance to the factory-installed wire sets.
Ferrite impregnated layers, silicone insulation for superior dielectric and heat performance, and high temperature Class E silicon jacket to withstand chemicals, moisture, and temperatures from -40 degrees Fahrenheit to 428 degrees Fahrenheit.
Pre-cut wire to exact length with reinforcing member for added strength and terminal retention.
Identical OE end caps, carbon impregnated fiberglass core for superior conductivity, fiberglass braid for maximum strength, conductive silicone layer for high temperature performance, and EMI/RFI noise suppression.

Top WaffleMaker Reviews

uxcell 671-4079 Auto Car Engine Spark Plug Cable Ignition Wire Set of 4 for Chrysler Pt Cruiser 2001-2009 Sebring for Dodge 4 Cylinder;