Name: UCTRONICS 3.5 Inches TFT Touch Screen
Features
Support Kernel from 4.1 to 4.9
Resolution: 480 x 320 pixels
Interface: SPI
SPI speed: 32MHz
Dimension: 55.98 x 85.60 mm
Support plug and play
Support touch screen
Support game and video
Automatic driver installation script
Well mate with Pi Zero, Pi B+, Pi2 ,Pi3 and Pi 3B+
Package Including
1pcs 3.5 inch touch screen
1pcs touch pen
Note: The raspberry pi shown in the picture is not included!
Please download and install our driver to avoid white screen from this link:https://www.uctronics.com/wiki/index.php?title=UCTRONICS_LCD35_RPI_(SPI_interface)#Download_and_install_driver
Please ensure the hardware connection is normal.If the hardware connection is incorrect, the lcd will not work fine
For the Male to Female Ribbon GPIO Cable to connect Raspberry Pi and 3.5inch Touch Screen, check ASIN: B07D991KMR.
- Supported Models: Raspberry Pi 3B+, 3B, 2B, B+, Pi Zero with Raspbian. Pi Motherboard NOT included in package.
- 3.5-inch 480x320 TFT LCD Display with touchscreen panel, draws power from GPIO pins, no extra power supply needed.
- SPI interface for portable or miniature projects, alternative to HDMI Monitor, DO NOT support dual display
- Plug-and-Play without rebooting the Pi. SPI speed runs up to 32MHz. For games and videos, check 3.5-inch HDMI version (ASIN: B076M399XX)
- Software package available for quick start, including calibration software and virtual keyboard. NOTE: To use with your own SD card, you need to download and install our Raspbian system with LCD driver.
- Supported Models: Raspberry Pi 3B+, 3B, 2B, B+, Pi Zero with Raspbian. Pi Motherboard NOT included in package.
- 3.5-inch 480x320 TFT LCD Display with touchscreen panel, draws power from GPIO pins, no extra power supply needed.
- SPI interface for portable or miniature projects, alternative to HDMI Monitor, DO NOT support dual display
- Plug-and-Play without rebooting the Pi. SPI speed runs up to 32MHz. For games and videos, check 3.5-inch HDMI version (ASIN: B076M399XX)
- Software package available for quick start, including calibration software and virtual keyboard. NOTE: To use with your own SD card, you need to download and install our Raspbian system with LCD driver.