Model: X1T-O
Type: For Olympus Panasonic (Lumix)
Compatible with: Olympus cameras(TTL II autoflash); Support all cameras that have PC sync socket
Build-in Remote System: 2.4 G wireless transmission
Modulation Method: MSK
Manual Flash: Support
TTL Auto Flash: TTL II
TTL Control:
High Speed Sync (HSS): Support
Flash Exposure Compensation (FEC): Support, ±3 stops 1/3 stop increments
Flash Exposure Lock (FEL): Support
Focus Assist: Manual open
Rear Curtain Sync: No
Modeling Flash: Support, fired with cameras depth of field preview button
Wireless Function: in TTL mode, Ratio off; in M mode, Flash Ratio(A B C); Support GR (grouping flash)
Controlled Slave Groups: in the GR grouping mode, 5 (A/B/C/D/E); in the Ratio grouping mode, 3(A/B/C)
Transmitter Distance: >100 meters
Channel: 32 channels
Synchronization Delay Set: Support (0-10ms, set in unit of 100us)
Wireless Shutter Release: Receiver can control cameras shooting through 2.5mm shutter release interface
Zoom Setting: The focal length can be adjusted through the transmitter
Display Panel: Wide LCD panel, backlight on/off
Output Interface: Transmitter: use a PC port to input and output; Receiver: use a 2.5mm sync cable to output
Firmware Upgrade: Use the Micro USB port to upgrade
Memory Function: Settings will be stored 2 seconds after last operation and recover after a restart
Transmitter Size/ Weight: 72x75x52(mm)/100g
Package Including:1 x X1T-O TTL Wireless Transmitter for Olympus Panasonic
- 16 Groups and 32 Channels to Wirelessly Control and Trigger, 01-99 Wireless ID setting avoid signal interference, Only Achieve Triggering when the channels and wireless IDs of the mater and slave uint are set to the same
- 5 Group Buttons and 4 Function Buttons Offer Convenient Manipulation, Multi Wireless Trigger Option for Wireless Flash Trigger/Wireless Speedlites Trigger/Wireless Shutter Release Trigger/Flash Trigger with 2.5mm Sync Cord Jack
- Full Graphic Display of 5 Groups simultaneously, large Dot Matrix LCD panel display, Type-C USB port for firmware upgrade
- Smart TCM function for transform the TTL shooting value tinto the output value in M mode by Long Press TCM Button, Switch between the One-Group and Multi-Group Mode by Short Press TCM Button
- Fully Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Memory Function, Magnfication Function, One-Shoot & Multi- Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc
- 16 Groups and 32 Channels to Wirelessly Control and Trigger, 01-99 Wireless ID setting avoid signal interference, Only Achieve Triggering when the channels and wireless IDs of the mater and slave uint are set to the same
- 5 Group Buttons and 4 Function Buttons Offer Convenient Manipulation, Multi Wireless Trigger Option for Wireless Flash Trigger/Wireless Speedlites Trigger/Wireless Shutter Release Trigger/Flash Trigger with 2.5mm Sync Cord Jack
- Full Graphic Display of 5 Groups simultaneously, large Dot Matrix LCD panel display, Type-C USB port for firmware upgrade
- Smart TCM function for transform the TTL shooting value tinto the output value in M mode by Long Press TCM Button, Switch between the One-Group and Multi-Group Mode by Short Press TCM Button
- Fully Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Memory Function, Magnfication Function, One-Shoot & Multi- Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc
