Screen Replacement For iPhone 6 LCD Touch Display - Black Recyco With Frame Glass Digitizer Full LCD Assembly with Home Button and Camera;

Note:
( Touch ID Not Available )
This home button does not have the Touch ID/Fingerprint Identification Function.
You will need to transfer the home button from your original screen onto this display
assembly to keep this touch ID sensor function. thank you for reading.

Specification:
Compatibility: All for iPhone 6 carrier (Not for iPhone 6s or 6 plus )

Main Parts:
1 x for iPhone 6 LCD touch screen+ LCD Display assembly.
1 x Clear Screen protector film for iPhone 6
NOTE: All the components above were pre-assembled.

Installation Notice:
1.Disconnect the battery cable before installation or make sure your phone is powered off.
This will protect your phone from incorrect installation damage.
2.There are many screws when replacing assembly which are different in size and length.
You'd better to mark them otherwise it may broke the screen if you put the screw in wrong place.
3. The flex cables are very sensitive and frangible. DO NOT over-bend or use excessive force to tear it, Handle Carefully!

Note1:
Please do remember, not press the screen corner,otherwise the inner screen will be broken.
If press hardly caused screen broken, it will come many straight lines. can not replace phone.

Note2:
If your screen occur the situation with lines,small and little,it can be incorrect installation,flex was
bend incorrectly or it damage flex fatal. Please buckle the cable again, you should make sure
the cable was buckled tightly. (How to sure ) there will have a sound when you buckle the cable.

Tips:
Please search "Replace iPhone 6 Screen" on YouTube for a video instruction of how to do the replacement.
please do not hesitate to contact us by sending us a message via Amazon. we aim to reply within 24 hours.
We are happy to help if any need.thank you very much.